View Single Post
      10-11-2012, 05:28 AM   #1
BaanVelgen
Major
Netherlands
24

 
BaanVelgen's Avatar
 
Drives: BMW Z3 M coupe
Join Date: Nov 2011
Location: Rotterdam


Posts: 1,105
iTrader: (9)

//Baan Velgen | Morr wheels

Baan Velgen is really proud to be the first MORR wheels dealer in europe.

We offer the full range of MORR wheels for the F10 M5.

Interested? Please contact us via PM for special pricing

The VS8.2;
The MonoForged VS8.2 made from the lightweight Aluminum Alloy T6061-T6 is a true piece of art. It weighs approximately 8.87 kg. This low weight was achieved by implementing several advanced manufacturing processes. These include flow-forming, which reduces barrel thickness by up to ten-percent; Vehicle Specific Profiles (VSP); and Finite Element Analysis (FEA) for Vehicle Specific Load Ratings (VSLR), and Vehicle Specific Weight Optimization (VSWO).

The geometry of the VS8.2's is also responsible for significant weight reduction. Hyperanalysis of the VS8.2's geometry enabled our engineers to improve the aesthetics of the design, while shaving an additional 0.8 lbs from the first VS8.2 prototype.

The MS5.2;
The MultiForged Morr wheels are fully forged, the inners, the outers, and the centers. The details on the wheels are really impressive and include side-spoke precision pocketing, back-pad machining for weight reduction, powder coated inner-barrels (even on parts that are covered by the tire), hidden hardware, and much more at no extra costs. To be able to tighten the assambly bolts upwards of 20% more than any other 3PC wheel Morr wheels uses steel inserts on all the fastener holes. A special developed selant in cooperation with 3M with specific to modular wheel-making will prevent the wheel from leaking.

We would love to make this happen on the F10 M5: