View Single Post
      01-30-2013, 12:10 PM   #34
nugent
Captain
nugent's Avatar
United_States
8
Rep
600
Posts

 
Drives: f10 m5
Join Date: Apr 2011
Location: san francisco

iTrader: (0)

Quote:
Originally Posted by jmh View Post
So after you read you VO and read VCM you then select the module to code and select "Read Coding Data" ,
Then you select 'Edit FDL' , change the value and you save the config (top buttons) and you go back
back by pressing top left green (back) arrow button.
You should see the FA again and by right clicking select "Activate FA".
You should see a green active text next to the FA.
Select the CAFD you just edited and select "Code FDL" in the SVT box( right hand middle portion of your UI)
Now the coding process should start and complete without error
You also may want to power cycle with the ignition switch

After you followed all of the above steps it should use the new values

also, i don't have the "HU_CIC" category show up on my VCM data for some reason.
__________________
e92 m3 6MT, RS4 6MT, S4 Avant 6MT, WRX 5MT, Corsica