Quote:
Originally Posted by M_Bimmer
The center BMW B&O connector is designated as E201:
Pin 1: GND on chassis ground comb location Z10.13B (Brown Wire)
Pin 2: LED (+) from B&O Amp Pin 2 (Purple/Yellow)
Pin 3: Motor (+) from B&O Amp Pin 16 (Yellow/Red)
Pin 4: +12VDC from JBE Connector Z7.2B Pin 4 (Red/Brown) = Fuse F26
Pin 5: Tweeter(-) from B&O Amp (Grey/White)
Pin 6: Tweeter(+) from B&O Amp (Grey/Black)
Pin 7: Midrange(-) from B&O Amp (Black/White)
Pin 8: Midrange(+) from B&O Amp (Black/Brown)
Pin 9: Not Connected
Pin 10: Not Connected
|
Sorry to revive this old thread, I am doing this myself and I am completely new to his forum. I noticed the E201 connector on the B&O speaker has 10 pins allocated in the E201 connector, are you sure the pin 9 & 10 is unused?
My car is equipped with HK system.