Quote:
Originally Posted by Ickdeep
Looking at my firestone sheet it, it says the recommend values for
front camber is -0.7 to 0.3
rear camber is -2.3 to -1.4
front toe -0.02 to -0.18
rear toe 0.05 to 0.25
Your numbers look really off.
No you shouldn't. I had Dinan setup as well.
Thats kinda of extra... I had 12mm front and 10mm rears and it was pretty flush
I'd take it to firestone and get them to do an alignment on their machine. It was like $90 if I remember correctly. They measure it and correct it as much as they can. They will recommend aftermarket kits if they can't get it within spec.
|
Ok, thanks for the input. I’ll be taking it in for an alignment when the new tires arrive