Quote:
Originally Posted by EuroKar
Great post.
When he is referencing to "The type of stage 1 board type", what does that mean ?
Are there different units out there for the same model engine ?
For example before the official release of the JB for M5/M6 vehicles, Terry from BMS had everyone use the 550/650 (N63) units and change the "user feature" and then that unit was then ready for M5/M6 application.
But now on his website the he lists the S63TU units separate.
Are we running the incorrect version if we were sold the N63 kits prior ?
Thanks for you time. You always answer very well for the BMS team
|
There are basically two board types used for the s63 Stage1. There is the G3 board and the G3_V2 board. The G3_V2 is the one that includes methanol support, fuel control, logs with the JB4 interface, etc. A lot of the stuff on there is not used for the s63tu (yet) but is used for the n63 Stage2. Most newer orders ship with the G3_V2 board and most older orders have the original G3 board.
Under firmware if your date ends with //3 it's the G3 board and if its //4 then it's the G3_V2 board.
Note these are both Stage1 boards and BMS does not offer a JB4 system for this platform.
Mike