Initiated launch control, for the first time today, but didnt go through with it. I just wanted to see how easy it would be to bring it up. All that needs doing is, switch T/C completely off, by holding the button down for a few seconds. Select S3 in manual mode. Push the gear lever forward, and you get the flag symbol. I didnt even touch the brake at any time, as the surface was flat. Shove your foot to the boards and hold, as soon as you let go of the lever, you are off. You can trim the launch revs with the C/C button. I dont think it could be any simpler. I did fiddle around, and see if i could get the flag with other settings, such as MDM mode, or S2 etc, but no, it has to be T/C fully off, and S3 selected.
|