Quote:
Originally Posted by is300wrx
Quote:
Originally Posted by savela
Running a power cable from the fuse box up to the V1 would be much more of a challenge as that A pillar has an airbag. Also would hate for you to ruin that alcantara!
|
Just finished the install. I ran the wire from the mirror to down the a pillar to the fuse box in the glove department. Wore nitrile gloves to protect alcantara from getting dirty/damaged. Tapped it off the lane departure fuse and used two 10 amp fuse. Tried with one 10amp on the fuse kit, but the lane departure would keep turn off so I added the second 10amp fuse to the fuse tap kit (has two slots). Seems to work perfectly without issues.
Now I need to swap out those front and rear reflectors with IND's painted ones...
|
Those fuse tap kits have two fuses because one of for the original circuit and one is for the second circuit you are adding