MORR Wheels | 2013 F10 M5 Build - Judgement Day - M5POST

MORRWheels · 01-11-2013, 03:34 PM

As part of the continuous release of our project: Judgement Day continues, we now deliver you the actual pictures of the shoot. These pictures will be featured in BMW Magazine in the near future.

Obviously we are still here (thank you very much Mayans...you killed our drama)

Some SPECS of Judgement Day:
• 2013 BMW F10 M5 Individual
• 21" MORR Multiforged MS5.2
• KW Variant III Coilovers
• Akrapovic Evolution Titanium Exhaust (Carbon Tips)
• Black Side Fender Grilles
• Black Front Kidney Grilles
• Color matched Reflectors
• BMW Individual Azurite Black
• BMW Individual Platinum Interior

nbennettksu · 01-11-2013, 03:45 PM

nice!

dhirm5 · 01-11-2013, 04:02 PM

Very nice; would look even better if you pushed the wheels out a bit with spacers -- or used a smaller offset when you made the wheels..

rjhoskins · 01-11-2013, 04:03 PM

Very nice look. Any ideas on the wheel/tire combo weight?

MORRWheels · 01-11-2013, 04:12 PM

Quote:

Originally Posted by nbennettksu

nice!

Thanks!!

RPiM5 · 01-11-2013, 04:13 PM

Quote:

Originally Posted by rjhoskins

Very nice look. Any ideas on the wheel/tire combo weight?

I would like to know this as well. Heavier or lighter than stock 20's???? Thanks.

MORRWheels · 01-11-2013, 04:49 PM

Quote:

Originally Posted by dhirm5

Very nice; would look even better if you pushed the wheels out a bit with spacers -- or used a smaller offset when you made the wheels..

We built them specifically to the customer's specifications, but if a more aggressive fitment is requested, that's no problem at all. Our MultiForged product line is 100% engineered-to-order, so the fitment is generated based on the customer's needs. We are currently building a few sets for the new M5/M6, so be on the look out.

Quote:

Originally Posted by rjhoskins

Very nice look. Any ideas on the wheel/tire combo weight?

Quote:

Originally Posted by RPiM5

I would like to know this as well. Heavier or lighter than stock 20's???? Thanks.

Did not weight them, but it should be about 1-2lbs heavier than the stock setup. Our 1PC monoblock offerings in a comparable 20" set-up to the OE wheels are significantly lighter than OEM

Warehouser · 01-11-2013, 04:57 PM

Quote:

Originally Posted by MORRWheels

We are currently building a few sets for the new M5/M6 so be on the look out.

Can't wait - GM/Brushed

vladberca · 01-11-2013, 05:13 PM

Great set up! Keep going with the good work!

RPiM5 · 01-11-2013, 05:16 PM

Quote:

Originally Posted by MORRWheels

Our 1PC monoblock offerings in a comparable 20" set-up to the OE wheels are significantly lighter than OEM

This was my next question. I really like your Monoblock designs. Where are you located? I may be giving you a call soon.

PatrickC23 · 01-11-2013, 05:21 PM

Very nice! Do you guys make monoblock concave version of this wheel?

MORRWheels · 01-11-2013, 05:30 PM

Quote:

Originally Posted by RPiM5

This was my next question. I really like your Monoblock designs. Where are you located? I may be giving you a call soon.

We are located in Miramar, FL. Give us a call and we`ll get something setup for you.

Quote:

Originally Posted by Patsc23

Very nice! Do you guys make monoblock concave version of this wheel?

We have 53 new designs coming out this year and a monoblock version of the MS5.2 is one of them.

Carlos@MORR · 01-11-2013, 05:37 PM

Quote:

Originally Posted by Warehouser

Can't wait - GM/Brushed

"Warehouser" or internally known as 7010.

PatrickC23 · 01-11-2013, 05:45 PM

Quote:

Originally Posted by MORRWheels

We are located in Miramar, FL. Give us a call and we`ll get something setup for you.

We have 53 new designs coming out this year and a monoblock version of the MS5.2 is one of them.

Whats the timing? I will be ordering wheels in April to have them by May.

Carlos@MORR · 01-11-2013, 06:04 PM

Quote:

Originally Posted by Patsc23

Whats the timing? I will be ordering wheels in April to have them by May.

Anything from 2 to 8 weeks.

Bokke · 01-11-2013, 06:12 PM

Very nice; job well done.

Carlos@MORR · 01-11-2013, 06:24 PM

Quote:

Originally Posted by Bokke

Very nice; job well done.

Thank you. Love your car btw. Sahkir FTW.

bm5bullit · 01-11-2013, 11:43 PM

I purchased two sets of these wheels from Carlos @ Morr for my 11 F10 535 and a set of these wheels in 19 inch size for my wifes F10 535. I can vouch for the impeccable quality and the light weight of the wheels. My only gripe was the delay in getting the wheels - took about 12 weeks to get the wheels. The wait ended up being well worth it and I was quite satisfied with both sets of wheels. I may be giving you a call again Carlos for my new M car.

nugent · 01-12-2013, 01:54 AM

um, sorry to point this out, but you spelled judgment wrong.

ROBD314 · 01-12-2013, 02:42 AM

Looking sick as always, good stuff guys ! The 5.2's looks perfect on the M5 !!

Mperial · 01-12-2013, 03:05 AM

Quote:

Originally Posted by nugent

um, sorry to point this out, but you spelled judgment wrong.

Maybe he's a native Briton.

stealth.pilot · 01-12-2013, 11:06 AM

Quote:

Originally Posted by Mperial

Quote:

Originally Posted by nugent

um, sorry to point this out, but you spelled judgment wrong.

Maybe he's a native Briton.

Yes. The spelling looks like English to me.

Nice car.

OP - Is the owner a board member?

Also thanks for the invite to have the Miami M5 meet at your shop. It was a bit late to change plans but maybe in the future.

01-11-2013, 03:34 PM	#1
MORRWheels Drives: BMWs Join Date: Sep 2005 Location: USA Posts: 1,547 iTrader: (1)	MORR Wheels \| 2013 F10 M5 Build - Judgement Day As part of the continuous release of our project: Judgement Day continues, we now deliver you the actual pictures of the shoot. These pictures will be featured in BMW Magazine in the near future. Obviously we are still here (thank you very much Mayans...you killed our drama) Some SPECS of Judgement Day: • 2013 BMW F10 M5 Individual • 21" MORR Multiforged MS5.2 • KW Variant III Coilovers • Akrapovic Evolution Titanium Exhaust (Carbon Tips) • Black Side Fender Grilles • Black Front Kidney Grilles • Color matched Reflectors • BMW Individual Azurite Black • BMW Individual Platinum Interior Last edited by MORRWheels; 01-25-2013 at 07:22 PM.
	Tweet

01-11-2013, 05:21 PM	#11
PatrickC23 Major Drives: '13 F10 AW/SO ///M5 Join Date: Apr 2012 Location: NNJ Posts: 1,171 iTrader: (0) Garage List 2013 BMW ///M5 [0.00]	Very nice! Do you guys make monoblock concave version of this wheel? __________________ Retired - 2009 C63 l 2007 Supercharged RRS l 2002 e46 SMG ///M3 l 2001 e46 330ci Alpine White/Sakhir Orange F10 M5 - 20" Modulare Matte Titanium Brushed B18s

01-11-2013, 06:12 PM	#16
Bokke Captain Drives: E90 M3 / F10 M5 Join Date: Mar 2007 Location: Dallas, TX Posts: 611 iTrader: (0)	Very nice; job well done. __________________ 09 E90 ///M3 -- Silverstone\|Black\|Piano Black\|Performance Steering Wheel\|M-DCT\|RAC Monolite RG63's\|Eisenmann Sport-Black\|VCF Front Spoiler\|VCF Rear Diffuser Type II\|CF OEM Mirror Caps\|CF OEM Rear Spoiler\|Invisibra\|V1 Hardwire\|Laser Interceptor // 13 F10 ///M5 - Sahkir Orange\|Full Black Marino\|Piano Black\|Executive Package\|Driver Assistant Package\|M-DCT\|Modulare B18's\|IND Cosmetic Package\|Akrapovic Evo\|OEM CF Spoiler

01-11-2013, 11:43 PM	#18
bm5bullit First Lieutenant Drives: 2013 BMW M5 Join Date: Jun 2009 Location: Texas Posts: 332 iTrader: (0)	Morr Wheels I purchased two sets of these wheels from Carlos @ Morr for my 11 F10 535 and a set of these wheels in 19 inch size for my wifes F10 535. I can vouch for the impeccable quality and the light weight of the wheels. My only gripe was the delay in getting the wheels - took about 12 weeks to get the wheels. The wait ended up being well worth it and I was quite satisfied with both sets of wheels. I may be giving you a call again Carlos for my new M car. __________________ 2012 Grand Cherokee SRT8 - her car 2013 M5, AW, black extended merino, BEL Sti-R, Laser Blinder, RKT lip, tint 2011 535i - SOLD 2008 E60 M5 - Gone

01-12-2013, 01:54 AM	#19
nugent First Lieutenant Drives: f10 m5 Join Date: Apr 2011 Location: san francisco Posts: 363 iTrader: (0)	um, sorry to point this out, but you spelled judgment wrong. __________________ e92 m3 6MT, RS4 6MT, S4 Avant 6MT, WRX 5MT, Corsica

01-11-2013, 04:02 PM	#3
dhirm5 Private First Class Drives: 2009 BMW M5, 2011 X5 35d Join Date: Dec 2010 Location: Bethesda, MD Posts: 151 iTrader: (0)	Very nice; would look even better if you pushed the wheels out a bit with spacers -- or used a smaller offset when you made the wheels..

01-11-2013, 04:03 PM	#4
rjhoskins New Member Drives: Future F10 M5 Join Date: Jan 2013 Location: NC Posts: 22 iTrader: (0)	Very nice look. Any ideas on the wheel/tire combo weight?

01-11-2013, 05:13 PM	#9
vladberca Colonel Drives: '09 jetta tsi 6mt Join Date: Oct 2009 Location: Craiova Posts: 2,871 iTrader: (0)	Great set up! Keep going with the good work!

01-12-2013, 02:42 AM	#20
ROBD314 Private First Class Drives: Duramax 2500HD Join Date: Jul 2010 Location: So Cal Posts: 108 iTrader: (0)	Looking sick as always, good stuff guys ! The 5.2's looks perfect on the M5 !! Last edited by ROBD314; 01-12-2013 at 02:51 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search