M6 CP dyno run with BM3 OTS STAGE 2

[Mr. M6]

Hey

i couldn't wait for the winter to come, i took the car for 2 runs and the temperature was around 38 C, 100 F, IAT was 122.5 F, very hot air

i got 639 WHP / 662 WTQ with BM3 tune
Boost 22 PSI

before tune i got 617 WHP / 569 WTQ with AMS CATLESS DP and MSR intake only. boost was 19 PSI

i didn't change the spark plugs or gaped still no misfire, running good and clean.

[onfireX5]

Nice runs ! 617rwhp on the stock tune ???

[Dumpspec]

good numbers thanks for sharing.

[bm5bullit]

Nice work for the 22 psi effort.

[tonydat1]

Nice numbers! Sucks mine was so low. Just changed up my tune and feels stronger already. Haven’t dyno yet.

[Dumpspec]

Originally Posted by tonydat1

Nice numbers! Sucks mine was so low. Just changed up my tune and feels stronger already. Haven’t dyno yet.

what tune did you switch to?

[Mr. M6]

Originally Posted by onfireX5

Nice runs ! 617rwhp on the stock tune ???

yup

[tonydat1]

Originally Posted by Dumpspec

what tune did you switch to?

Went with mission performance stage 2. Will keep bm3 if I may need later.

[apexlocator]

Everytime I see an m6gc I kick myself for not getting one instead...lol.
Good numbers OP.

Originally Posted by tonydat1

Went with mission performance stage 2. Will keep bm3 if I may need later.

I can guess your numbers are around 650/650....MP is good at fine tuning the wtq.

[tonydat1]

Originally Posted by apexlocator

Everytime I see an m6gc I kick myself for not getting one instead...lol.
Good numbers OP.




I can guess your numbers are around 650/650....MP is good at fine tuning the wtq.

Will let you know today. Going dyno before I get turbo and clutch installed.

[Mr. M6]

Originally Posted by apexlocator

Everytime I see an m6gc I kick myself for not getting one instead...lol.
Good numbers OP.




I can guess your numbers are around 650/650....MP is good at fine tuning the wtq.

go buy M6 GC, its really nice car

[Mr. M6]

Originally Posted by tonydat1

Will let you know today. Going dyno before I get turbo and clutch installed.

waiting for the results, good luck

[apexlocator]

Originally Posted by tonydat1

Will let you know today. Going dyno before I get turbo and clutch installed.

Sorry I did not see your visitor message as I'm usually not signed in when reading this forum.

My MP stage 2 dyno #s were 680whp/710wtq.

[Mr. M6]

Originally Posted by apexlocator

Sorry I did not see your visitor message as I'm usually not signed in when reading this forum.

My MP stage 2 dyno #s were 680whp/710wtq.

great power, upgraded map sensor to 3.5?

[apexlocator]

Originally Posted by Mr. M6

great power, upgraded map sensor to 3.5?

yes, 3.5 MAPs and SSP clutches. I had MP push wtq a little and switched to r888r.

[Mr. M6]

Originally Posted by apexlocator

yes, 3.5 MAPs and SSP clutches. I had MP push wtq a little and switched to r888r.

yea with ssp clutches and 3.5 map sensor you can go more power

[Jasoneo5]

Originally Posted by apexlocator

Sorry I did not see your visitor message as I'm usually not signed in when reading this forum.

My MP stage 2 dyno #s were 680whp/710wtq.

Damn - wish BM3 made that kind of whp on St2

[apexlocator]

Originally Posted by Jasoneo5

Damn - wish BM3 made that kind of whp on St2

Its more of a stage 2+. The usual MP stage 2 will probably be ~650/650.

[Mr. M6]

Originally Posted by Jasoneo5

Damn - wish BM3 made that kind of whp on St2

you need to upgrade your clutches with that power, BM3 Stage 2 power is really good for OEM clutches no need for more

[Dumpspec]

Originally Posted by Mr. M6

you need to upgrade your clutches with that power, BM3 Stage 2 power is really good for OEM clutches no need for more

was finally able to dyno. we hit almost the same numbers haha. i ran 640rwhp and 680trq. was pretty hot when i dyno so i will be waiting for a cololer weather to dyno again and hope to hit 650rwhp.

[Mr. M6]

Originally Posted by Dumpspec

was finally able to dyno. we hit almost the same numbers haha. i ran 640rwhp and 680trq. was pretty hot when i dyno so i will be waiting for a cololer weather to dyno again and hope to hit 650rwhp.

yes we know our range in hot weather now, we will check again in winter, it will be 20-30whp +