Evolve R Cable now available for Fxx Cars

Evolve Automotive · 02-06-2018, 08:01 PM

Quote:

Originally Posted by bleunetizen

very nice, I loved the evolve tune on my v10 m6 before.

do you have any info on boost curve please? jb4 probably wont be needed anymore?

Thank you for the post!
I will try to get a plot of the boost curve on our dyno next time.

JB4 is no longer needed. We do a full ECU flash without the need for the JB4 to manipulate anything.

Bruno Standtopcar · 05-20-2018, 05:27 PM

I have downpipes installed on my M6 f06, how much hp and torque can I get whit a stage 2 remap?
Thanks

induc916 · 05-20-2018, 07:55 PM

Quote:

Originally Posted by Bruno Standtopcar

I have downpipes installed on my M6 f06, how much hp and torque can I get whit a stage 2 remap?
Thanks

I'm curious on this too, with stock clutch and stock plugs.

Imran@Evolve · 05-25-2018, 10:43 AM

Quote:

Originally Posted by Bruno Standtopcar

I have downpipes installed on my M6 f06, how much hp and torque can I get whit a stage 2 remap?
Thanks

Quote:

Originally Posted by induc916

I'm curious on this too, with stock clutch and stock plugs.

We usually see 730-740 BHP and 650 lb.ft Torque on our dyno (crank).

Bruno Standtopcar · 06-15-2018, 10:34 AM

Quote:

Originally Posted by Imran@Evolve

We usually see 730-740 BHP and 650 lb.ft Torque on our dyno (crank).

I have send you my file data last Monday.
Can't wait to have the File back tuned up

wtfmateim65 · 06-26-2018, 09:22 PM

Is downpipe/intake required for the Stage 2 tune? And would I be able to mix in a few gallons of E85 with your tunes on and off or would that require a separate map?

Also how much boost does Stage 1 and 2 Push? 3.5 bar map sensor required? I do like how you seem you keep torque below 650 to save the clutches and improve driveability

Imran@Evolve · 10-04-2018, 11:47 AM

Quote:

Originally Posted by wtfmateim65

Is downpipe/intake required for the Stage 2 tune? And would I be able to mix in a few gallons of E85 with your tunes on and off or would that require a separate map?

Also how much boost does Stage 1 and 2 Push? 3.5 bar map sensor required? I do like how you seem you keep torque below 650 to save the clutches and improve driveability

You don't need a downpipe but it helps keep EGT lower for longer runs at full throttle and provides faster turbo spool so its advisable. we don't have E85 over here so haven't tuned for it.

21.9 PSI on Stage 2. No need for 3.5 bar sensor.

irishbimmer · 10-04-2018, 12:01 PM

Hello Imran;
Is that a different cable than the one used for the E63 V10 tune I had...
Thanks,
Bill

Imran@Evolve · 10-05-2018, 03:24 AM

Quote:

Originally Posted by irishbimmer

Hello Imran;
Is that a different cable than the one used for the E63 V10 tune I had...
Thanks,
Bill

Hey Bill. Yes its the same cable.

05-20-2018, 05:27 PM	#24
Bruno Standtopcar New Member 0 Rep 5 Posts Drives: Bmw m6 f06 Join Date: May 2018 Location: Portugal iTrader: (0)	Stage 2 I have downpipes installed on my M6 f06, how much hp and torque can I get whit a stage 2 remap? Thanks
	Appreciate 0 Quote

06-26-2018, 09:22 PM	#28
wtfmateim65 First Lieutenant 17 Rep 305 Posts Drives: AW 92 335i JB4 Join Date: Sep 2008 Location: Vegas iTrader: (2)	Is downpipe/intake required for the Stage 2 tune? And would I be able to mix in a few gallons of E85 with your tunes on and off or would that require a separate map? Also how much boost does Stage 1 and 2 Push? 3.5 bar map sensor required? I do like how you seem you keep torque below 650 to save the clutches and improve driveability
	Appreciate 0 Quote

10-04-2018, 12:01 PM	#30
irishbimmer Banned 1139 Rep 1,561 Posts Drives: Silverstone M6 CP, Bulldozer, Join Date: Sep 2013 Location: Orange County, CA iTrader: (0)	Hello Imran; Is that a different cable than the one used for the E63 V10 tune I had... Thanks, Bill
	Appreciate 0 Quote