BMS tune with Catless downpipes

[shahano]

Will the CEL light go off with the BMS tune if I have Catless downpipes? What can I do to make the CEL light go off? DO i need a different tune than BMS if I have catless downpipes???

[Fantasm]

Yes, catless DP's will cause a CEL.
No one can tune the error code out yet because no one has really cracked the ECU.
The CEL is not really bothersome. Its a small engine light in the right middle side of the dash. There is no error message in entertainment center either.

Eventually probably there will be mods to make it go away, in the mean time, its worth having a little icon there for the horsepower and sound.
Wait until you hear the sound of those turbos breathing better Its sick!

FYI: See this thread about my RPi downpipes and stock heatshield

http://f10.m5post.com/forums/showthread.php?t=1043201

[Andym3100k]

Originally Posted by shahano

Will the CEL light go off with the BMS tune if I have Catless downpipes? What can I do to make the CEL light go off? DO i need a different tune than BMS if I have catless downpipes???

Buy a plx wireless kiwi 2 to set the cel off, but it will come back again maybe after driving it the next day or so.

[///Mposter]

Has anyone tried the spark plug non-foulers? They have been used for sometime to remedy this issue of not having catalytic converters. The small hole doesn't let enough extra fuel or oxygen pass to sensor. Worth a try if you are unable to find the electronic solutions .

[JPMD]

Originally Posted by Andym3100k

Buy a plx wireless kiwi 2 to set the cel off, but it will come back again maybe after driving it the next day or so.

Does this have its own software or what iPhone software do you use to clear codes?

[JPMD]

http://vibrantperformance.com/catalo...oducts_id=1605

found this on a thread

seem similar to O2 spacers
Unfortunately don't think they are 100% effective

[shahano]

Originally Posted by Andym3100k

Buy a plx wireless kiwi 2 to set the cel off, but it will come back again maybe after driving it the next day or so.

is there a way to set the CEL off without it ever coming on again?

[akh23456]

Originally Posted by shahano

is there a way to set the CEL off without it ever coming on again?

BMS can tool is the only thing i know that works because its plugged into Obd-2 port and is constantly reseting the cel.

[shahano]

Originally Posted by akh23456

BMS can tool is the only thing i know that works because its plugged into Obd-2 port and is constantly reseting the cel.

Ur answer made no sense.

[mstmng]

Originally Posted by shahano

Ur answer made no sense.

there was bms can tool which was constantly clearing CEL
but u cannot buy it anymore, unless somebody who was lucky and bought it while it was on sale will be happy to sell it to you

[Andym3100k]

Originally Posted by JPMD

Does this have its own software or what iPhone software do you use to clear codes?

There are 2 kinds of plx kiwi, 1 for iPhone & the other for Android. U can download apps at both playstore. Not sure how to clear it permanently, I need to clear once a day n is less than 5 sec so no trouble for me.

[JPMD]

Thanks what app do you use to clear codes or does the device come with it's own software?

[Andym3100k]

Originally Posted by JPMD

Thanks what app do you use to clear codes or does the device come with it's own software?

U can download dashcommand from the app's store.