05-12-2013, 04:30 PM | #1 |
Lieutenant Colonel
127
Rep 1,622
Posts |
Battery Error
Featured on BIMMERPOST.com Anyone else? Do I need to change how it's hard wired, how so?
__________________
2013 BMW INDIVIDUAL ///M5 {Frozen Black/Amaro Brown/Amaro Brown Alcantara/White Contrast Stitching/Piano Black Trim}
|
05-12-2013, 04:37 PM | #2 |
Major
358
Rep 1,377
Posts |
Mine did this. My V1 is wired to a switched feed in the overhead console. The first tap didn't turn off when the ignition was switched off. So we re-did it and found another source.
Are you sure it turns off after 3 seconds? I'd find another power source if this error continues to happen.
__________________
Current: 2015 X5 M - Donington Grey/Mugello Red - DINANTRONICS Stage 2 + Free Flow Exhaust - Bimmerpost Featured!
Past: Bimmerpost Featured 2014 X5 xDrive50i · 2014 Jeep SRT · 2013 Tesla Model S P85+ · Bimmerpost Featured 2013 F10 M5 · 2012 550 xDrive · 2011 M3 ZCP |
Appreciate
0
|
05-12-2013, 06:45 PM | #3 | |
Lieutenant Colonel
127
Rep 1,622
Posts |
Quote:
__________________
2013 BMW INDIVIDUAL ///M5 {Frozen Black/Amaro Brown/Amaro Brown Alcantara/White Contrast Stitching/Piano Black Trim}
|
|
Appreciate
0
|
05-13-2013, 09:34 AM | #4 |
Captain
239
Rep 978
Posts |
Went thru this during the install process and had the tech properly connect the power to the right source. Found out by making a few calls to BMW techs that the most reliable key switch power is one wire coming out of the trunk fuse block. Works like a charm. BTW, almost all other key switch power sources will confuse the DME due to the proximity logic of the key fobs.
__________________
2021 M340i
2020 X3 M40i - her car 2019 M5, AW, DP's, MSR CAI, BM3, SOLD 2020 Chev. ZR2 Bison truck, Daily Driver |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|