Official Built Motor F10 M5 thread

[Maxixt]

Target is 1000 plus hp with new g25 660 garretts, when turbos will be available i will post update from dyno. If someone interested , arp studs fits from honda vtec, only 10mm spacers have to put in the bottom of thread in block.Dip stick because i have already seen cars with melted bearing and 1l of oil instead of 9l.

[induc916]

Originally Posted by Maxixt

Target is 1000 plus hp with new g25 660 garretts, when turbos will be available i will post update from dyno. If someone interested , arp studs fits from honda vtec, only 10mm spacers have to put in the bottom of thread in block.Dip stick because i have already seen cars with melted bearing and 1l of oil instead of 9l.

I'm currently running the G25-660 made 920whp. Good luck in your build -



https://www.instagram.com/p/B-MvlwZJ..._web_copy_link

[Dandadda]

Originally Posted by induc916

I'm currently running the G25-660 made 920whp. Good luck in your build -



https://www.instagram.com/p/B-MvlwZJ..._web_copy_link

Any update on this car or is the build dead?

[f1joe]

Originally Posted by Dandadda

Any update on this car or is the build dead?

Proper dead.
Cedar performance realised what RK are about and parted ways.
RK built 3 motors in uk and they’ve either blown or customer has returned to stock.
They specialise in one run Hiroshima maps just for dragy
They got found out at a recent airstrip event. $50k on a build and they struggle to do a pass without going in limp mode.
Its embarrassing.
Slava the guy who owns this car is in so deep the fat idiot is being blackmailed by RK so he has a warranty for his broke ass car. Forced to defend RK online 🤣🤣🤣

[Doctor_X]

Jesus.

I have yet to hear anyone talk like that about RK.

Stresses me out because my plan was to have them build a motor once mine goes kabloeey.

[M5_Raz]

Not defending anyone, but I know of quite a few people running rk engines and all are happy.

Me personally? I'd go with Carbahn Autoworks.

[Dandadda]

Originally Posted by f1joe

Proper dead.
Cedar performance realised what RK are about and parted ways.
RK built 3 motors in uk and they’ve either blown or customer has returned to stock.
They specialise in one run Hiroshima maps just for dragy
They got found out at a recent airstrip event. $50k on a build and they struggle to do a pass without going in limp mode.
Its embarrassing.
Slava the guy who owns this car is in so deep the fat idiot is being blackmailed by RK so he has a warranty for his broke ass car. Forced to defend RK online 🤣🤣🤣

What a disappointment. Seems the f10 platform just died Perfomance wise once Ram(allmotor) moved over to the Audi Rs3. I was hoping to get some more info on installing the Garrett g25-660r turbos but there’s pretty much nothing online. This was suppose to be the one project that works but oh well. Guess I’ll become my own test dummy again. SMH

[707M5]

Originally Posted by Doctor_X

Jesus.

I have yet to hear anyone talk like that about RK.

Stresses me out because my plan was to have them build a motor once mine goes kabloeey.

Don't do it!

[Chaman]

I think I have one of the only successful running forged builds.

Motor was built by Jeup bored to 4.6L, running meth, ported throttle bodies from allmotor , xonarotor turbos , dme stage 3 flash and Jb4 for boost control

3000 miles running awesome

[707M5]

Originally Posted by Chaman

I think I have one of the only successful running forged builds.

Motor was built by Jeup bored to 4.6L, running meth, ported throttle bodies from allmotor , xonarotor turbos , dme stage 3 flash and Jb4 for boost control

3000 miles running awesome

Any pics of your build?

[TinCanSailor]

Originally Posted by M5_Raz

Not defending anyone, but I know of quite a few people running rk engines and all are happy.

Me personally? I'd go with Carbahn Autoworks.

I have over 10k miles on a stock rebuild with no issues and have had nothin but great communication with RK and his team after my build well over a year later. They have never hesitated to respond to me and have always done so in a timely manner, like minutes later.

[Chaman]

No problem s with remove and replace but you can’t sleeve a S63TU

707m5 - some in my gallery

[TinCanSailor]

Originally Posted by f1joe

Proper dead.
Cedar performance realised what RK are about and parted ways.
RK built 3 motors in uk and they’ve either blown or customer has returned to stock.
They specialise in one run Hiroshima maps just for dragy
They got found out at a recent airstrip event. $50k on a build and they struggle to do a pass without going in limp mode.
Its embarrassing.
Slava the guy who owns this car is in so deep the fat idiot is being blackmailed by RK so he has a warranty for his broke ass car. Forced to defend RK online 🤣🤣🤣

Slava's name was on the ShiftS3ctor Roster this weekend. Can't be all that bad. Kind of hard to blackmail someone into taking their car to an Airstrip Attack event. Maybe there is another Slava with an M6 that is built for 900hp.

[allmotor_2000]

🍿

[TinCanSailor]

Originally Posted by allmotor_2000

🍿

I've been waiting for the retort but with 1 post for the year we could be waiting a while. I am not saying that what I saw on the SS3 roster was empirical data but the things that were said above were just hyperbolic conjecture.

[induc916]

Originally Posted by TinCanSailor

Slava's name was on the ShiftS3ctor Roster this weekend. Can't be all that bad. Kind of hard to blackmail someone into taking their car to an Airstrip Attack event. Maybe there is another Slava with an M6 that is built for 900hp.

Just leave this here. - f1joe

[TinCanSailor]

Originally Posted by induc916

Just leave this here. - f1joe

Right on! That's some strong action, Congrats Slava!

[Lucaszanin]

What’s yours dragy times?! Just wondering how fast it can be. Dyno numbers doest say too much.

[TTV8M]

Originally Posted by Chaman

No problem s with remove and replace but you can’t sleeve a S63TU

707m5 - some in my gallery

Why can't you sleeve a s63tu? I just had mine done with VAC in philly

[TTV8M]

Originally Posted by Chaman

I think I have one of the only successful running forged builds.

Motor was built by Jeup bored to 4.6L, running meth, ported throttle bodies from allmotor , xonarotor turbos , dme stage 3 flash and Jb4 for boost control

3000 miles running awesome

Could it be the engines are way beyond their limit? Who really knows the limits, especially if you don't upgrade absolutely everything............