F10 M5

allmotor_2000 · 09-15-2017, 06:24 PM

Absolutely- followed by an oil change

allmotor_2000 · 10-02-2017, 10:38 AM

Update:

Dropped off the car this morning at SDAutotech for the engine swap. Should take a few days plus another day or two for the initial break-in. I believe Steve Dinan does the initial break-in himself. They promised me some pics of the removal/re-install so will post those when I get them.

M4RAUDR · 10-02-2017, 10:46 AM

Quote:

Originally Posted by allmotor_2000

Update:

Dropped off the car this morning at SDAutotech for the engine swap. Should take a few days plus another day or two for the initial break-in. I believe Steve Dinan does the initial break-in himself. They promised me some pics of the removal/re-install so will post those when I get them.

During the motor swap we are installing the DSS Carbon Fiber Driveshaft and the DSS 1200whp axles.

Meanwhile I decided to add some R888R's on the rears in anticipation of the added power...

You are fucking awesome. I can't wait to see this beast. Hopefully I'll spot you out in WLV sometime... Congrats. Awesome project.

/

somer · 10-02-2017, 11:27 AM

Quote:

Originally Posted by allmotor_2000

Update:

Dropped off the car this morning at SDAutotech for the engine swap. Should take a few days plus another day or two for the initial break-in. I believe Steve Dinan does the initial break-in himself. They promised me some pics of the removal/re-install so will post those when I get them.

During the motor swap we are installing the DSS Carbon Fiber Driveshaft and the DSS 1200whp axles.

Meanwhile I decided to add some R888R's on the rears in anticipation of the added power...

Kind of curious as to what Steve's opinion is on your whole build? Mainly in the sense he's always been more about complete cars and balance and such, has he been all-in on helping with the big power with the motor build and all that? Such a cool project man

allmotor_2000 · 10-02-2017, 12:05 PM

Quote:

Originally Posted by somer

Kind of curious as to what Steve's opinion is on your whole build? Mainly in the sense he's always been more about complete cars and balance and such, has he been all-in on helping with the big power with the motor build and all that? Such a cool project man

I just told him I want a motor done. This project was appealing because it will determine all the weaknesses in this platform. We did many flow tests on the manifolds, heads etc.

The actual power adders are another project altogether and I haven't discussed that much. Once its ready for prime-time, we will bring all the details out!

Fundguy1 · 10-02-2017, 12:24 PM

Quote:

Originally Posted by allmotor_2000

I just told him I want a motor done. This project was appealing because it will determine all the weaknesses in this platform. We did many flow tests on the manifolds, heads etc.

Keep us informed thx

kevn23 · 10-02-2017, 01:04 PM

Awesome! Can't wait to see the Beast in action!

BinH · 10-02-2017, 07:59 PM

Quote:

Originally Posted by allmotor_2000

Absolutely- followed by an oil change

Have you spoken with DSS lately? They have decided to do a 2 piece driveshaft for the F10 M5 now.

allmotor_2000 · 10-02-2017, 08:25 PM

Quote:

Originally Posted by BinH

Have you spoken with DSS lately? They have decided to do a 2 piece driveshaft for the F10 M5 now.

Nope but have sent out a note based on your feedback...

allmotor_2000 · 10-03-2017, 10:08 AM

I contacted DSS and there is no 2pc in the works. Not sure where you got your info.

Used2be · 10-03-2017, 01:01 PM

Quote:

Originally Posted by allmotor_2000

Engine removal pictures.

Even for an experienced mechanic it must be a tedious exercise to make sure everything is reconnected and tightened properly after they reinstall it! Thanks for the shots.

allmotor_2000 · 10-03-2017, 03:14 PM

Quote:

Originally Posted by Used2be

Even for an experienced mechanic it must be a tedious exercise to make sure everything is reconnected and tightened properly after they reinstall it! Thanks for the shots.

It's best not to be the guinea pig here... although its not that bad if you have a reference engine (car) sitting around.

Tanin · 10-03-2017, 07:03 PM

This is getting good !!!

TheHouseWon · 10-03-2017, 07:07 PM

Quote:

Originally Posted by allmotor_2000

Time to turn it up a notch...

Enjoy Pure Stage X!!

Omg!

Used2be · 10-03-2017, 07:37 PM

Quote:

Originally Posted by allmotor_2000

Time to turn it up a notch...

Enjoy Pure Stage X!!

I have to ask, are you going to the stock air box with your intake ducting? Looks very interesting, please tell us more! More plumbing to be done with oil lines and such?

allmotor_2000 · 10-03-2017, 07:39 PM

Quote:

Originally Posted by Used2be

I have to ask, are you going to the stock air box with your intake ducting? Looks very interesting, please tell us more! More plumbing to be done with oil lines and such?

The kit is done... removed it to do the motor swap. Once the new engine is broken in, will re-install and run all the plumbing.

This concept is already running on Pure's own M6 and making gobs of power on a stock motor.

Right now everything is getting ceramic coated and will be back in the car around 2 weeks!

Yes.. stock air-box. I will dyno with and without the box to finally put the intake wars to rest

BinH · 10-03-2017, 07:44 PM

Quote:

Originally Posted by allmotor_2000

I contacted DSS and there is no 2pc in the works. Not sure where you got your info.

From DSS... check your P.M. in a second.

Used2be · 10-03-2017, 07:49 PM

Very exciting, I envy you your adventure! Ease into it, even if the Pure crew are using it, give everything time to settle in before you hammer it. You aren't stock anymore!!!

allmotor_2000 · 10-03-2017, 07:50 PM

Quote:

Originally Posted by Used2be

Very exciting, I envy you your adventure! Ease into it, even if the Pure crew are using it, give everything time to settle in before you hammer it. You aren't stock anymore!!!

schnell1982 · 10-03-2017, 08:51 PM

Quote:

Originally Posted by allmotor_2000

Been searching for Pure M6 with this turbos. Couldn't find it.
Are they posting reviews and power gains on the forum ?
Turbos look siiiick

allmotor_2000 · 10-03-2017, 08:59 PM

They will shortly - not much has been shared yet!

brad850csi · 10-04-2017, 01:04 PM

Are they GTX3071R's or something similar?

09-15-2017, 06:24 PM	#111
allmotor_2000 F10 1/4 WR: 9.9s / 142.5mph 1/2 WR: 175.5mph 1087 Rep 1,968 Posts Drives: 2018 RS3, 991 Turbo Join Date: Jul 2014 Location: Westlake Village, CA iTrader: (0)	Absolutely- followed by an oil change
	Appreciate 0 Quote

10-02-2017, 10:38 AM	#112
allmotor_2000 F10 1/4 WR: 9.9s / 142.5mph 1/2 WR: 175.5mph 1087 Rep 1,968 Posts Drives: 2018 RS3, 991 Turbo Join Date: Jul 2014 Location: Westlake Village, CA iTrader: (0)	Update: Dropped off the car this morning at SDAutotech for the engine swap. Should take a few days plus another day or two for the initial break-in. I believe Steve Dinan does the initial break-in himself. They promised me some pics of the removal/re-install so will post those when I get them. Attached Images Last edited by allmotor_2000; 05-21-2018 at 04:22 PM..
	Appreciate 4 somer959.50 gary_F10M51.50 apexlocator243.00 schnell1982345.00 Quote

10-02-2017, 01:04 PM	#117
kevn23 Private First Class 30 Rep 105 Posts Drives: - Join Date: Aug 2007 Location: SoCal iTrader: (0)	Awesome! Can't wait to see the Beast in action!
	Appreciate 0 Quote

10-03-2017, 10:08 AM	#120
allmotor_2000 F10 1/4 WR: 9.9s / 142.5mph 1/2 WR: 175.5mph 1087 Rep 1,968 Posts Drives: 2018 RS3, 991 Turbo Join Date: Jul 2014 Location: Westlake Village, CA iTrader: (0)	I contacted DSS and there is no 2pc in the works. Not sure where you got your info.
	Appreciate 0 Quote

10-03-2017, 07:03 PM	#123
Tanin Private First Class 34 Rep 175 Posts Drives: BMW Join Date: Apr 2014 Location: SoCal iTrader: (0)	This is getting good !!! __________________ 2015 M5 6MT Silverstone / Sakhir Orange CP,MPE(Ti Tips),GA1R 20x9.5/10.5(Brushed),KW v3, Dinan Sways, AMS DP's(Catted), Bel StiR+, ALP Quad
	Appreciate 0 Quote

10-03-2017, 07:49 PM	#128
Used2be Perennial PFC 336 Rep 1,274 Posts Drives: F90 M5 DG/Aragon Join Date: Oct 2012 Location: Michigan, USA iTrader: (0)	Very exciting, I envy you your adventure! Ease into it, even if the Pure crew are using it, give everything time to settle in before you hammer it. You aren't stock anymore!!!
	Appreciate 0 Quote

10-03-2017, 08:59 PM	#131
allmotor_2000 F10 1/4 WR: 9.9s / 142.5mph 1/2 WR: 175.5mph 1087 Rep 1,968 Posts Drives: 2018 RS3, 991 Turbo Join Date: Jul 2014 Location: Westlake Village, CA iTrader: (0)	They will shortly - not much has been shared yet!
	Appreciate 1 schnell1982345.00 Quote

10-04-2017, 01:04 PM	#132
brad850csi Colonel 1316 Rep 2,349 Posts Drives: 16 F13 M6 Comp Join Date: Jan 2015 Location: Auckland, New Zealand iTrader: (0)	Are they GTX3071R's or something similar?
	Appreciate 0 Quote