M6 343M Wheels on F10 M5

[engineblast]

Here is my setup on F10 (non-M) with M6 20" 343M wheels
12MM spacer in front (No rubbing), also M package has wider front fenders.
No Spacer on rear, and it does rub

[carrera2RSL]

Are 343M M5 front offsets ET32 or ET34

This link suggests ET34 on the summary tab then 32 when you click through and threads on this forum state both, depending on the thread

http://www.alloywheelsdirect.net/inf...ting_chart/bmw

[Demon Barber]

I need a little help from you guys to confirm this will work before I pull the trigger on a set. I have a '13 nonCP M5, and I want to put stock F12 M6 343 wheels on it. Tires are stock pilot super sport 265/295. I just want to make absolutely sure there won't be any rubbing issues. Can someone who has tried it chime in and put my mind at ease? Much appreciated.

[SakM_5]

Originally Posted by Demon Barber

I need a little help from you guys to confirm this will work before I pull the trigger on a set. I have a '13 nonCP M5, and I want to put stock F12 M6 343 wheels on it. Tires are stock pilot super sport 265/295. I just want to make absolutely sure there won't be any rubbing issues. Can someone who has tried it chime in and put my mind at ease? Much appreciated.

I bought a set for my last m5. mine was a 15 non comp and they had the 295/265 on them. If your on stock suspension they will not rub at all and look great.

[Demon Barber]

Thanks so much for the prompt response. Puts my mind at ease.

[SakM_5]

Originally Posted by Demon Barber

Thanks so much for the prompt response. Puts my mind at ease.

no problem

[kuruca]

Originally Posted by SakM_5

no problem

how about with h&r springs? will they rub? any idea will be great, thank you

[Six Pot]

Originally Posted by kuruca

how about with h&r springs? will they rub? any idea will be great, thank you

I'm putting M6 wheels on mine next week. One post says it will as long as you have a 6-8mm spacer up front but if someone could double confirm it would be much appreciated.

[kuruca]

Originally Posted by Six Pot

I'm putting M6 wheels on mine next week. One post says it will as long as you have a 6-8mm spacer up front but if someone could double confirm it would be much appreciated.

I already got them with 295 rears and 275 fronts will install this weekend to see what happens

[Igor_M5]

I put my stock suspension back in recently, and put M6 front and rear's on, no rubbing. But if anyone is in the Tri-State and wants to swap their M5's, lmk... dont want to return the car on lease with M6 wheels. lol

[Six Pot]

Originally Posted by Igor_M5

I put my stock suspension back in recently, and put M6 front and rear's on, no rubbing. But if anyone is in the Tri-State and wants to swap their M5's, lmk... dont want to return the car on lease with M6 wheels. lol

Did you have the M6 wheels and a aftermarket suspension?

[carrera2RSL]

I'd like to see some pictures of M6 wheels fitted to stock and lowered cars

[Igor_M5]

Originally Posted by Six Pot

Did you have the M6 wheels and a aftermarket suspension?

Prior - I had KW V3's and H&R with a rear M6 fitted. Had 305/30 Pirelli, and 295/30 PSS, neither rubbed.

Here's one with M6 Rear / H&R springs.

[ARC550]

Originally Posted by Igor_M5

Prior - I had KW V3's and H&R with a rear M6 fitted. Had 305/30 Pirelli, and 295/30 PSS, neither rubbed.

Here's one with M6 Rear / H&R springs.

Nice!


You think I can Run M6 wheels with 315 R888 in the rear ? I have ACS springs
I also have a set of rims from my M6 lol

[Six Pot]

Originally Posted by Igor_M5

Prior - I had KW V3's and H&R with a rear M6 fitted. Had 305/30 Pirelli, and 295/30 PSS, neither rubbed.

Here's one with M6 Rear / H&R springs.

Its clear a M6 wheel will fit in the rear. What about the front M6 wheel when lowered?

[HXS]

Originally Posted by Six Pot

Its clear a M6 wheel will fit in the rear. What about the front M6 wheel when lowered?

Fronts aren't as aggressive as the rears so they will clear just fine when lowered.

[Six Pot]

Originally Posted by HXS

Fronts aren't as aggressive as the rears so they will clear just fine when lowered.

According to a post earlier in this thread it interferes in the front and a 6mm spacer is required. I'm installing the wheels tomorrow but want to do a H&R drop in the near future so I'm just making sure I have my facts in order

[HXS]

Originally Posted by Six Pot

According to a post earlier in this thread it interferes in the front and a 6mm spacer is required. I'm installing the wheels tomorrow but want to do a H&R drop in the near future so I'm just making sure I have my facts in order

A 6-mm spacer is required for the M6 343M's to clear the M5's brakes?

That doesn't make a whole lot of sense since the M6 343M's are more aggressive than the M5 343M's.

[Six Pot]

Originally Posted by Igor_M5

Prior - I had KW V3's and H&R with a rear M6 fitted. Had 305/30 Pirelli, and 295/30 PSS, neither rubbed.

Here's one with M6 Rear / H&R springs.

Awesome, just got my wheels on today. Now to get the springs done!

[GladiatorOwner]

Originally Posted by Six Pot

Awesome, just got my wheels on today. Now to get the springs done!

How's the fit, in your opinion of course? And Picts...?

[Six Pot]

Originally Posted by GladiatorOwner

How's the fit, in your opinion of course? And Picts...?

I feel the car is a bit more planted and love the aggressive rear stance. Couple old and new pics to compare

[GladiatorOwner]

Looks great! Thanks for adding the Picts.