Will the downpipe install instructions for n63 work for s63tu?

[Ca86108]

I am trying to find some detailed instructions on how to install downpipes on an s63tu. All I can find are ones for the n63.

http://images.activeautowerke.com/In...structions.pdf

I called them and they said that they will work for the x5m and the n63 motors. Will this work for the s63tu?

[DenverF10M5]

Originally Posted by Ca86108

I am trying to find some detailed instructions on how to install downpipes on an s63tu. All I can find are ones for the n63.

http://images.activeautowerke.com/In...structions.pdf

I called them and they said that they will work for the x5m and the n63 motors. Will this work for the s63tu?

The only things that look similar are the O2 sensors and downpipe to turbo clamps.

[SchillerM]

Since the S63tu downpipes fit the N63 I would assume most is the same. I know some brackets are a bit different, but nothing you can't figure out.
Feel free to send your downpipes to me afterwards
Matt

[milestonemotors]

Full instructional Video (Including special tools, parts, torque specs and skill level) on how to replace the downpipes on an M6. Its the same procedure for an M5 and very similar to an N63. Feel free to comment opinions or questions.

Special tools:
Torque wrench, stubby 6 mm allen and multimeter, E-Torx sockets

Parts:
Downpipe to exhaust gasket ring- (2) 18307843213
Turbo charger to downpipe gasket ring- (2)
Downpipe to exhaust nuts- (4)18307597650

Torque specs:
Turbo to downpipe V-band-19mn
Downpipe to exhaust nuts- 21nm.

Skill level: (1 easiest, 5 hardest) 2

Fernando Osorio
President
Milestone Motors LLC

Website: https://www.milestonemotorspb.com/
Instagram: https://www.instagram.com/milestonemotors/
Facebook: https://www.facebook.com/Milestonemotorspb
Email: milestonemotorsllc@gmail.com
Linktree: https://linktr.ee/milestonemotors
Snapchat: Milestonemotors


Fabworx downpipes can be found here:
http://fabworxperformance.com/produc...ownpipes-2012/