bootmod3 New Feature Release *** OBD Unlock and OFFLINE Flasher ***

TheHouseWon · 02-11-2018, 10:26 AM

Quote:

Originally Posted by Mr. M6

so you use ots stage 2 and jb4 map 2 together ?

i want to know the whp on ots sage 2 only

Yes, I run both as the OTS serves as a backend flash (corrects fuel trims and afr, timing, torque demand).

I would guess 640whp with OTS Stage 2 without JB4. The OTS runs 22psi.

Mr. M6 · 02-12-2018, 12:59 AM

Quote:

Originally Posted by TheHouseWon

Yes, I run both as the OTS serves as a backend flash (corrects fuel trims and afr, timing, torque demand).

I would guess 640whp with OTS Stage 2 without JB4. The OTS runs 22psi.

640whp sounds good for my car with AMS catless dp and MSR intake

Mkai0 · 02-24-2018, 07:29 AM

Has anyone tried PTF's OBD2 Flash tune yet? Are you happy with it? I've been following some info on the M3/4 forum, and have seen varying results with the OBD2 flash tune.

Dumpspec · 02-24-2018, 11:47 AM

Quote:

Originally Posted by Mkai0

Has anyone tried PTF's OBD2 Flash tune yet? Are you happy with it? I've been following some info on the M3/4 forum, and have seen varying results with the OBD2 flash tune.

I just got my BM3 tune but couldn’t install because OBD flash isn’t ready for our cars yet. I’m not sure how long it’ll be before we can flash using OBD. They told me I can still get my ECU unlock at an authorized dealer, but the point of this OBD flash was so I didn’t have to remove my DME haha. Hopefully they will release this feature soon.

Mkai0 · 02-24-2018, 06:24 PM

Quote:

Originally Posted by dumpm3

I just got my BM3 tune but couldn’t install because OBD flash isn’t ready for our cars yet. I’m not sure how long it’ll be before we can flash using OBD. They told me I can still get my ECU unlock at an authorized dealer, but the point of this OBD flash was so I didn’t have to remove my DME haha. Hopefully they will release this feature soon.

I'm sorry to hear that, and hopefully that issue is resolved soon. I've been holding to see what PTF's OBD2 feature had in store, but may jump off the hype train soon.

Dumpspec · 02-24-2018, 06:57 PM

Quote:

Originally Posted by Mkai0

I'm sorry to hear that, and hopefully that issue is resolved soon. I've been holding to see what PTF's OBD2 feature had in store, but may jump off the hype train soon.

BM3 is really good. I have their tune on my M4 and it ran very strong with no issues. Smooth power delivery all across the board. I’ve installed BM3 using the new OBD method on a few of my customers cars and have heard nothing but positive reviews. I’m sure they’ll release this feature soon for our cars.

FSociety · 03-01-2018, 09:10 PM

OBD Unlock for V8 is in testing in-house before they can release a closed-beta for customers. They're wrapping up the N55 EWG and PWG this week and N20 will be next before the V8's (N63TU/S63TU) as dual dme requires more work

Dumpspec · 03-02-2018, 09:59 AM

Quote:

Originally Posted by FSociety

OBD Unlock for V8 is in testing in-house before they can release a closed-beta for customers. They're wrapping up the N55 EWG and PWG this week and N20 will be next before the V8's (N63TU/S63TU) as dual dme requires more work

thanks for the update! i'm just sitting here waiting for the release haha.

FSociety · 03-04-2018, 02:01 AM

Quote:

Originally Posted by dumpm3

thanks for the update! i'm just sitting here waiting for the release haha.

Join the Bootmod3 Enthusiast Facebook Group for most current news

epiphanyray · 03-04-2018, 07:53 AM

Quote:

Originally Posted by TheHouseWon

Yes, I run both as the OTS serves as a backend flash (corrects fuel trims and afr, timing, torque demand).

I would guess 640whp with OTS Stage 2 without JB4. The OTS runs 22psi.

Hey Carlos,

if the OTS Stage 2 runs 22 psi, do you (or anyone) have an idea as to how many psi of boost does it do by rpm/gear? IE:

18 psi @ 2800rpm?
19 psi @ 3000
20 psi @ 3300
21 psi @ 3600
22 psi @ 3900-4000

WOuld love to see a log and see how much the OTS stage 2 on BM3 requests (boosts) through the RPM range.

TheHouseWon · 03-04-2018, 09:19 AM

Quote:

Originally Posted by epiphanyray

Hey Carlos,

if the OTS Stage 2 runs 22 psi, do you (or anyone) have an idea as to how many psi of boost does it do by rpm/gear? IE:

18 psi @ 2800rpm?
19 psi @ 3000
20 psi @ 3300
21 psi @ 3600
22 psi @ 3900-4000

WOuld love to see a log and see how much the OTS stage 2 on BM3 requests (boosts) through the RPM range.

you want to see it without JB4? I can log via map 4 or did you want to see it stacked with JB4 at map 2 (22 psi)?

epiphanyray · 03-04-2018, 09:56 AM

Quote:

Originally Posted by TheHouseWon

Quote:

Originally Posted by epiphanyray

Hey Carlos,

if the OTS Stage 2 runs 22 psi, do you (or anyone) have an idea as to how many psi of boost does it do by rpm/gear? IE:

18 psi @ 2800rpm?
19 psi @ 3000
20 psi @ 3300
21 psi @ 3600
22 psi @ 3900-4000

WOuld love to see a log and see how much the OTS stage 2 on BM3 requests (boosts) through the RPM range.

you want to see it without JB4? I can log via map 4 or did you want to see it stacked with JB4 at map 2 (22 psi)?

Would love to see ots stage 2 only. Third gear pull from 3000-7000 rpm.

See actual boost and requested boost.

That would be awesome! Thanks

dsmclark · 03-06-2018, 03:22 AM

Looks like its updated on their website to say you don't have to send the ECU's in and can do the mobile flash

FSociety · 03-06-2018, 07:31 AM

https://www.facebook.com/groups/1995370330682747/

Dumpspec · 03-06-2018, 02:01 PM

Quote:

Originally Posted by dsmclark

Looks like its updated on their website to say you don't have to send the ECU's in and can do the mobile flash

nice! i will try it tonight :-)

FSociety · 03-06-2018, 02:07 PM

Quote:

Originally Posted by dumpm3

nice! i will try it tonight :-)

Reach out to them via that FB Group before you do, since i haven't seen any release on S63Tu being fully supported as dual dme's are in closed-beta last i heard.

Dumpspec · 03-06-2018, 03:16 PM

Quote:

Originally Posted by FSociety

Reach out to them via that FB Group before you do, since i haven't seen any release on S63Tu being fully supported as dual dme's are in closed-beta last i heard.

will do bro! thank you for providing the facebook link. i haven't used FB in a long time haha

FSociety · 03-06-2018, 03:18 PM

Quote:

Originally Posted by dumpm3

will do bro! thank you for providing the facebook link. i haven't used FB in a long time haha

Anytime, its a good way to stay up to date with their new features and most current updates usually faster than what we see here

fhaze3 · 03-06-2018, 08:48 PM

waiting patiently until closed beta is over..

Dumpspec · 03-12-2018, 10:34 AM

i have successfully flashed my M5 via OBD and wow! the power improvements from my dinan piggy back is very noticeable. Kind of wish i had dyno before and after. My butt dyno says Bootmod3 is faster haha.

FSociety · 03-12-2018, 10:44 AM

Quote:

Originally Posted by fhaze3

waiting patiently until closed beta is over..

http://f80.bimmerpost.com/forums/sho....php?t=1474470 STEP BY STEP instructions

Jasoneo5 · 03-12-2018, 07:54 PM

Is F10 M5 OBD unlock available yet? Saw the X5M is on Facebook today...

02-24-2018, 07:29 AM	#25
Mkai0 Second Lieutenant 30 Rep 232 Posts Drives: F10 M5 Black Join Date: May 2016 Location: Unknown iTrader: (0)	Has anyone tried PTF's OBD2 Flash tune yet? Are you happy with it? I've been following some info on the M3/4 forum, and have seen varying results with the OBD2 flash tune.
	Appreciate 0 Quote

03-01-2018, 09:10 PM	#29
FSociety IG @bmwF9xG80 3812 Rep 7,593 Posts Drives: G80 M3, X4M, G07 X7m50 Join Date: Apr 2012 Location: NYC to NJ to Orlando FL iTrader: (3) Garage List 2023 BMW G80 M3 [0.00] 2020 BMW X4MC [0.00] 16' BMW X4 M40i [10.00] 06 Cadillac STS [0.00]	OBD Unlock for V8 is in testing in-house before they can release a closed-beta for customers. They're wrapping up the N55 EWG and PWG this week and N20 will be next before the V8's (N63TU/S63TU) as dual dme requires more work __________________ 60-130mph 6.5s X4M #HCP 60-130mph 5.0s G80 M3 #OrlandoAutowerks Sauce IG: @bmwF9XG80
	Appreciate 0 Quote

03-06-2018, 03:22 AM	#35
dsmclark Second Lieutenant 81 Rep 224 Posts Drives: Cayman GT4 Clubsport Join Date: Aug 2017 Location: UK iTrader: (0)	Looks like its updated on their website to say you don't have to send the ECU's in and can do the mobile flash
	Appreciate 0 Quote

03-06-2018, 07:31 AM	#36
FSociety IG @bmwF9xG80 3812 Rep 7,593 Posts Drives: G80 M3, X4M, G07 X7m50 Join Date: Apr 2012 Location: NYC to NJ to Orlando FL iTrader: (3) Garage List 2023 BMW G80 M3 [0.00] 2020 BMW X4MC [0.00] 16' BMW X4 M40i [10.00] 06 Cadillac STS [0.00]	https://www.facebook.com/groups/1995370330682747/ __________________ 60-130mph 6.5s X4M #HCP 60-130mph 5.0s G80 M3 #OrlandoAutowerks Sauce IG: @bmwF9XG80
	Appreciate 0 Quote

03-06-2018, 08:48 PM	#41
fhaze3 GLG-20 185 Rep 369 Posts Drives: 18 Ram 2500 Ltd,e30 M52 Track Join Date: Mar 2014 Location: North Georgia iTrader: (1)	waiting patiently until closed beta is over..
	Appreciate 0 Quote

03-12-2018, 10:34 AM	#42
Dumpspec Major 570 Rep 1,234 Posts Drives: @dumpspec Join Date: Apr 2014 Location: Bay Area iTrader: (12)	i have successfully flashed my M5 via OBD and wow! the power improvements from my dinan piggy back is very noticeable. Kind of wish i had dyno before and after. My butt dyno says Bootmod3 is faster haha. Last edited by Dumpspec; 03-12-2018 at 12:23 PM..
	Appreciate 1 FSociety3811.50 Quote

03-12-2018, 07:54 PM	#44
Jasoneo5 Second Lieutenant 39 Rep 294 Posts Drives: 997 TTs, GS-F, RS6, M6 GC-sold Join Date: Dec 2013 Location: SF Bay area iTrader: (3)	Is F10 M5 OBD unlock available yet? Saw the X5M is on Facebook today...
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search