08-20-2014, 03:41 PM | #1 |
Enlisted Member
4
Rep 41
Posts |
Brand of tire jack
Which tire jack do you use when changing wheels/tires in the m5? I used the spare wheel jack from the x5 and it took a lot of elbow grease. It made me wonder whether the x5 one is appropriate for the m5. Thanks in advance.
|
08-20-2014, 05:16 PM | #2 |
Lieutenant Colonel
704
Rep 1,917
Posts |
I use a Griot's Garage low profile floor jack, but it doesn't look like they sell those anymore.
I'd check Harbor Freight...
__________________
Matt
|
Appreciate
0
|
08-20-2014, 06:09 PM | #3 |
Major General
247
Rep 6,125
Posts |
If you need it for casual DIY use, Harbor Freight ones will do just fine.
I'm using 1.5 ton (since 2010) and 2 ton jack (2013), no issue what so ever. 1.5 ton: http://www.harborfreight.com/rapid-p...html-7814.html 2 ton: http://www.harborfreight.com/2-ton-a...ump-61406.html
__________________
PAST: F80 M3 ZCP | 911.1 C2S | F10 M5 ZCP | E70 X5M | E90 M3 | E46 M3 | E36 M3 |
Appreciate
0
|
08-21-2014, 10:08 AM | #5 |
Captain
104
Rep 806
Posts |
I use the Michelin 2 ton low profile jack with the adapter from BMS. Very nice.
__________________
2014 ///M5 CP Tanzanite Blue/Cohiba - 11.15 @ 128.8 & 1.84 60' (2150' DA) - BPM Tune - MSR Intake - SSP DCT - SS DPs & HFC Mid Pipes/X-Over - E Race Muffs - 19" MT DRs... On to a new home.
|
Appreciate
0
|
08-21-2014, 02:14 PM | #7 |
Major General
247
Rep 6,125
Posts |
http://www.ecstuning.com/Search/Site..._Pad/ES251251/
http://www.reverselogic.us/shop.html...0&sort=nameAsc
__________________
PAST: F80 M3 ZCP | 911.1 C2S | F10 M5 ZCP | E70 X5M | E90 M3 | E46 M3 | E36 M3 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|