01-15-2015, 11:37 AM | #1 |
First Lieutenant
58
Rep 318
Posts |
HRE P40SC from E60 M5 to F10 M5?
I'm considering purchasing an F10 M5 and I'm wondering if I could fit my HRE P40SC wheels from an E60 M5.
From what I've found the stock 20" wheels are: 9x20 ET34 10x20 ET34 My HRE wheels are: 9.5x20 ET14 10.5x20 ET28 I'm guessing spacers will be required? Pretty clueless when it comes to offset and spacers so any advice is appreciated. Any downside / risk? |
01-15-2015, 03:37 PM | #2 |
Licensed Drug Dealer
742
Rep 2,269
Posts |
Spacers? I don't think so. Spacers push the wheels out and your offsets are already a bit aggressive.
The rears are fine but the fronts might be too aggressive. They might poke out a bit. |
Appreciate
0
|
01-15-2015, 09:13 PM | #4 |
Captain
195
Rep 612
Posts |
BBS FI were designed for the F10 M5 and have the following offsets:
9.5x20 et 26 10.5x20 et 28 Your rears would be perfect but fronts will poke too much as other posters mentioned. |
Appreciate
0
|
01-16-2015, 07:42 AM | #5 |
First Lieutenant
58
Rep 318
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|