Correct offset before ordering?

[ULOOKD]

About to order my wheels but before I do just wanted to check offsets etc, I don’t my rolling my guards to fit these but just seeing if I have the right offsets!

Ok so I’ve got the following:
REARS
20x11.5 +18 NR (106mm)
FRONTS
20x9.5 +12 HP (68mm)

The wheels are SSR TF1

Thanks jay

[ULOOKD]

Also forgot to mention the car is lowered on KW HAS thanks

[HXS]

Those are way too aggressive!

[HXS]

Might I add that 20” will look small since the design has a stepped lip

[Nikolov]

Originally Posted by HXS

Might I add that 20” will look small since the design has a stepped lip

+1

I moved up to 21" due to that exact reason. The rears can go up to ET33 probably, fronts ET28.

[carrera2RSL]

You could go et 31 and lower et at the front I ran et28 with 10x20 and 275 and tried 3mm spacers with 11.5 et33 with 305

[ULOOKD]

I’ve attached the link for the offsets etc, hoping I can still change them as I have put the order in! Wanting to go maximum dish both front and rear what would you recommend? Fronts have to be HP disk thanks


http://www.ssr-wheels.com/wheels/tf1.asp

[Nikolov]

If the wheels are not custom built to your specs (offsets), I doubt they're going to fit. You need 11J or 11.5J in the rear with ET31-33. It seems only the SL disks are close to that.

In the front you want 9.5J with 25-28, you can get the HP disk there.

[carrera2RSL]

Originally Posted by Nikolov

If the wheels are not custom built to your specs (offsets), I doubt they're going to fit. You need 11J or 11.5J in the rear with ET31-33. It seems only the SL disks are close to that.

In the front you want 9.5J with 25-28, you can get the HP disk there.

Agreed I ran 11.5 et33 with 305/30 and 10.0 et28 with 275/35 with no problems at all, I could have gone et30 'just' at the back but this will depend on camber and the tyre shape, you can do et26 or perhaps less with 10 at the front, but starts to look 'wrong'

[fullhouse customs]

mine is also running HAS kit, OEM camber and running 9.5x21 et22 and 11x21 et28

265/30/21 and 305/25/21 Michelin PSS

no rubbing with 5 up and about 2mm rear clearance between tyre and arch

No spacers.

I decided to go a little narrower on wheels but decided to lower the offsets to give the wheels more concave, wider wheels would have meant higher offset and less concave

fullsizeoutput_3aef by Rajan Bhasin, on Flickr
2d4bb8b8-b9fe-4e8a-91f2-08b8dde94038 by Rajan Bhasin, on Flickr
P3lCm7YrRlWB6M%lTPRE%A by Rajan Bhasin, on Flickr
fullsizeoutput_3ae8 by Rajan Bhasin, on Flickr
IMG_9199 by Rajan Bhasin, on Flickr
8c241915-e953-4396-8e11-6cc5fa6d3ff2 by Rajan Bhasin, on Flickr