New Cyba Gloss Black Tips

[LOL_AMG]

Another shot

[Lerxst M4]

Looks good!!

[SocalDude]

Originally Posted by PhilT3

SUPER easy! No lift needed. Just get a nice piece of cardboard to lay on. The old tips literally slip off. You may need to spray some WD40 where the tips contact the muffler output pipe. Then just grab them and twist back and forth. They may be hard to break lose. But once you do, they just slip off.
Then the new ones just slide on and tighten down with (3) Allen bolts and lock nuts.
Between prep, work, clean up and not rushing... Factor an hour. If you're quick, you'll gain back some time. If it takes you longer, don't tell anyone! Lol

Thank you for the feedback. Were you able to tighten all 3 bolts and nuts given the limited clearance underneath?

[PhilT3]

Originally Posted by SocalDude

Thank you for the feedback. Were you able to tighten all 3 bolts and nuts given the limited clearance underneath?

Yeah... You tighten each one just a few turns at a time and then rotate the tip and tighten the next one. Do this until you can turn the tip any more. Then go back and tighten down the lock nut on two of the bolts, then go back to the last one and tighten it down. It should be logical once you get started.

[POBA]

Thanks for sharing. Sweet ride, beautiful pics. Enjoy it