12-10-2018, 03:03 PM | #2 |
Major
612
Rep 1,326
Posts |
If you can get at least 6 turns in with your standard wheel bolts you should be ok. Personally I would go with extended bolts for peace of mind.
__________________
2014 Frozen Black F10 M5 | Agency Power HFC Downpipes | Custom Open Flash Stage 2 Tune | KW HAS kit | 3D Design Lip | 3D Design Skirts | 3D Design Spoiler | IND Front & Rear Reflectors | IND M5 Badge | M Performance Steering Wheel | M Performance CF Shift Knob | Pedal Haus Pedals & Paddles | Turner Exhaust |
|
12-10-2018, 04:34 PM | #3 |
General
60479
Rep 19,668
Posts |
|
Appreciate
0
|
02-05-2019, 09:16 PM | #4 |
Major
542
Rep 1,064
Posts
Drives: i5 M60, M5's, 535.335, M550i
Join Date: Jan 2015
Location: Here
|
Wondering how the 5mm looked on your car?
__________________
2013 535i M, Carbon black 20' 6 M wheels, totaled.
2018 750M , 2013 M5 , Individual Silver, Bolt ons-Straight piped 2019 M550 686BK Black Chrome 20"wheels, filters, Evolve Stage 1, Res delete 2024 i5 M60 Cape York Green |
Appreciate
0
|
03-02-2019, 07:05 AM | #7 |
Major
542
Rep 1,064
Posts
Drives: i5 M60, M5's, 535.335, M550i
Join Date: Jan 2015
Location: Here
|
Buy spacers from BMS
They come with bolts and I've had perfect results on last 2 cars with them
__________________
2013 535i M, Carbon black 20' 6 M wheels, totaled.
2018 750M , 2013 M5 , Individual Silver, Bolt ons-Straight piped 2019 M550 686BK Black Chrome 20"wheels, filters, Evolve Stage 1, Res delete 2024 i5 M60 Cape York Green |
09-03-2020, 05:14 AM | #8 | |
Enlisted Member
17
Rep 39
Posts |
Quote:
I'm going the 305 tyres route and was thinking I might space them out, just a little bit. |
|
Appreciate
0
|
09-03-2020, 01:13 PM | #9 | |
General
60479
Rep 19,668
Posts |
Quote:
17mm Bolts are by trs-uk. 10xM14x1.25, 33mm thread tapered wheel bolts. Good luck! *can use the locking wheel nuts if you wish, its over six turns to tighten. Last edited by M5Rick; 09-03-2020 at 01:28 PM.. |
|
Appreciate
1
Guy M516.50 |
09-03-2020, 01:52 PM | #10 | |
Enlisted Member
17
Rep 39
Posts |
Quote:
I'm going to hold off purchasing some for the moment, since I posted this morning I have decided to order the NO (Porsche version) of the PS4's which are supposed to have .4 inch (10mm) wider tread than the standard 305's while keeping the same actual tyre section width. I'll fit them first and see what they look like. Thanks for the info, much appreciated! Last edited by Guy M5; 09-03-2020 at 02:12 PM.. |
|
Appreciate
1
M5Rick60479.00 |
09-13-2020, 04:49 AM | #12 | |
Enlisted Member
17
Rep 39
Posts |
Quote:
The Porsche version of the 305 P4s have a tread width of 320, too big! I have now fitted standard 305 P4's with no spacer and I think I'll leave it at that. Thanks for all the help. |
|
Appreciate
1
M5Rick60479.00 |
09-13-2020, 12:20 PM | #15 |
General
60479
Rep 19,668
Posts |
Yeah,I'd stick to the standard,those Porsche ones are extra wide tread for the engine over wheels traction of a 911.
|
Appreciate
0
|
09-13-2020, 12:25 PM | #16 | |
General
60479
Rep 19,668
Posts |
Quote:
Mine are just on the back wheels,I have none on the front. 15mm spacers is way too much I think and as your having h&r lowered it may catch more. Best bet is to first get the springs fitted first then go from there...I'd say 10mm max. Good luck! |
|
Appreciate
1
J11SEK268.00 |
09-13-2020, 01:21 PM | #17 | ||
Second Lieutenant
268
Rep 226
Posts |
Quote:
|
||
Appreciate
1
M5Rick60479.00 |
09-13-2020, 02:25 PM | #18 |
General
60479
Rep 19,668
Posts |
It's on the thread below.
|
Appreciate
0
|
10-26-2020, 12:43 PM | #19 |
General
60479
Rep 19,668
Posts |
Bolts should be 33mm for 5mm spacers, standard are 28mm.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|