08-10-2017, 03:07 AM | #1 |
Lieutenant
183
Rep 579
Posts |
Final decisions on rims !
Firstly thanks to all those who have replied and shared offsets. I am getting very close to a final decision on rims
Sizes will be 10x20 F 11.5x20 R, moving to 275/35 and 305/30 possibly Pirelli Trofeo R or Michelin P4S My offset choice is et28 or 27 F and et 32 or 33 R. Thinking of light concave but not too expensive my two current favourites are BC Forged RZ05 or RZ21, satin black I think I have done the maths at the back to manage inside and outside clearance which is the slight Unknown Any comments greatly appreciated The car is a late 14 CP with Dinan roll bars KW V3, the rest is stock apart from OE Carbon diffuser. I want an RKP front lip but don't like the price ! |
08-15-2017, 01:28 AM | #3 |
Lieutenant
183
Rep 579
Posts |
Porsche fit 295's on 11.5 and 305/30 on 12.0 20's. So it's not aggressive stretch plus if I go with a tyre like the Trofeo's they are a little bigger as well. Oh and they will look a little 'fatter' from the back. Regarding weight it will be negligible difference, less than the difference between tyre weights. I guess the same questions could be asked about 10 or 9.5 at the front. I prefer the feel of a tyre on a wider rim, generally a bit sharper with better turn in
|
Appreciate
0
|
08-21-2017, 11:52 AM | #5 |
Brigadier General
1692
Rep 3,200
Posts |
Congrats! Make sure you post pics. Any reason why you are going matte instead of gloss black?
|
Appreciate
1
carrera2RSL183.00 |
08-21-2017, 01:09 PM | #6 |
Lieutenant
183
Rep 579
Posts |
A good question, a while back I fitted gloss black wheels and didn't like the look with shiny tyres, I think matt (well satin really) will look more like factory finish and work better after a valet
|
Appreciate
0
|
08-24-2017, 07:53 PM | #7 |
Lieutenant General
9153
Rep 14,522
Posts |
Satin is definitely the finish to go with!
__________________
~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg |
Appreciate
1
carrera2RSL183.00 |
08-29-2017, 02:34 AM | #8 |
Alderran`s lost princess
69
Rep 178
Posts |
Can't wait to see the wheels
__________________
These are not your hunting grounds !
want it: https://www.auto-data.net/images/f10/file7427010.jpg |
Appreciate
1
carrera2RSL183.00 |
08-29-2017, 07:33 AM | #9 |
First Lieutenant
238
Rep 360
Posts |
Patiently waiting for you to flood the post with pictures !! Congrats on a great upgrade.
__________________
Instagram MRBrandoe
|
Appreciate
1
carrera2RSL183.00 |
09-03-2017, 03:25 AM | #10 |
Lieutenant
183
Rep 579
Posts |
I changed my order as I was thinking that BC Forged RZ21's were the same as signature SV104's and they are not the same design. I like the BC forged RZ05's but decided in the end to go for Signature SV104's now deciding on finish, I might move to Brushed black Tint
|
Appreciate
0
|
09-03-2017, 01:48 PM | #11 |
Lieutenant General
9153
Rep 14,522
Posts |
those Signature SV104's are SWEET! with a Satin/Matte finish
__________________
~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~ Follow me on Instagram: lsturbointeg |
Appreciate
1
carrera2RSL183.00 |
09-05-2017, 01:54 AM | #13 |
Lieutenant
183
Rep 579
Posts |
I have decided on brushed black, a picture here with brushed Black tinted on an M3, from the M3 section. Interestingly this car runs 19" front and 20" rear. You can see how the finish changes in light. Slight bronze hue in some lights. Looks like I will be the first M5 to run with SV104's. The bottom picture is a 20" rim and is deep dish the M5 on 11.5 will be deeper dish than this
|
Appreciate
0
|
09-05-2017, 02:10 AM | #14 |
Brigadier General
1692
Rep 3,200
Posts |
Those look sick! Can't wait to see some installed pics.
|
Appreciate
1
carrera2RSL183.00 |
09-05-2017, 02:29 AM | #15 |
Lieutenant
183
Rep 579
Posts |
|
Appreciate
0
|
09-06-2017, 12:18 AM | #17 |
Major General
4065
Rep 5,231
Posts |
Very nice wheels and choice of finish; can't wait to see some pix.
__________________
CURRENT: 22' INDIVIDUAL M5| CHALK | TARTUFO | CCB | MPE | H&R | IND
GONE: 19' M5C| SINGAPORE GREY| ARAGON|VELOS VLS-06|H&R|iPE|IND|XPEL|CF|RADENSO GONE: 15' F10 M5|BSM|BLACK|VELOS VSS-S2|KW|AKRA|IND|CF |ESCORT 360|VELOS PIGGY GONE: 13' F10 M5|SG|BLACK|AKRA|KW|IND LONG GONE: 09' E60 M5|02' E39 M5 |
Appreciate
1
carrera2RSL183.00 |
09-06-2017, 02:16 AM | #18 |
Lieutenant
183
Rep 579
Posts |
I am having second thoughts about the lighter brushed black with white, it might look a little washed out. There is a darker brushed black, I am also quite drawn to gloss black with silver and black cars with these style wheels on.
The look of the wheel changes with gloss to emphasise the edges and looks more classic race ? |
Appreciate
0
|
09-07-2017, 12:23 PM | #21 |
Lieutenant
183
Rep 579
Posts |
Thanks,
It's running KW V3 with Dinan roll bars ride heights are 370mm F and 353mm R this is about 10-15mm lower than CP ride heights I have until Monday to finalise my wheel colour |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|