09-10-2022, 12:59 AM | #1 |
Private First Class
44
Rep 115
Posts |
Selling my 601m wheels off my 2014 comp pack. They are in good shape. No curb rash on any of the wheels. There are some minor rock chips and imperfections in the clear coat as would be expected on wheels with 70k on them. Also some minor tire machine marks in them. One of the rears has a mark on the inside of the barrel where a rock got caught between the caliper and the rim but isn't noticeable when mounted on the car. Honestly they looked perfect on the car and I never noticed any of these imperfections until I had them at eye level on the bench while I was cleaning them. Tires are also included. The fronts are 265-35-20 Pirelli P Zero. Lots of tread left on these with light camber wear. The rears are 305-30-20 MP4S that are nearly worn out on the inside. I flipped the tire so the outside is in so they can at least be used for a little while. No patches in any tires and no TPMS sensors. Also freshly balanced. I'm located in Sonoma county 94931 Local pick up only. Text is preferable but will do my best to check pm's. 707-338-twenty two thirty nine |
09-23-2022, 09:16 AM | #4 |
Second Lieutenant
148
Rep 241
Posts |
By chance willing to ship to New Jersey ?
__________________
BMW F06 M6 GC (Fun Ride)
BMW F15 M-Sport 35iXDrive (Family Ride) BMW F48 X1 (Wife's Ride) 96 Camry (Daily Ride) |
Appreciate
0
|
09-23-2022, 10:16 AM | #5 |
Private First Class
44
Rep 115
Posts |
|
Appreciate
0
|
09-24-2022, 11:46 AM | #6 |
Private First Class
44
Rep 115
Posts |
Be aware of a scammer Papping09 saying these are his.
|
Appreciate
1
Infamous039147.50 |
11-24-2022, 02:11 PM | #12 |
Private First Class
36
Rep 112
Posts |
|
Appreciate
0
|
11-25-2022, 01:56 PM | #13 | |
Private First Class
44
Rep 115
Posts |
Quote:
|
|
Appreciate
0
|
03-09-2023, 11:43 PM | #20 |
Private First Class
44
Rep 115
Posts |
I made them from scratch. It’s a stock comp exhaust. There was nothing on the market that I liked so had to fab them up. I really wanted the angle of the slash cut to match the back valance angle. Also wanted 3.5 inch and didn’t want to have to weld them on in case I ever wanted to change them. Here’s some pics
|
Appreciate
2
Denver_M516.50 TinCanSailor629.50 |
Post Reply |
Bookmarks |
|
|