M6beast MSR Intake data

[m6beast]

Originally Posted by Lalit@AUTOcouture

George for president

Lol!

[MpowerMike]

When are these intake systems going to be out to sell ?

[m6beast]

Originally Posted by MpowerMike

When are these intake systems going to be out to sell ?

Next week, now that CNC aluminum velocity stack filter adaptor is perfected producing a bunch next week ready to ship.
Now the other problem I have is getting filters without waiting too long. Right now I have enough for 8 intakes.

Just emailed the company to see how long of a wait for a larger order for I'll be working on this style intake for the M4. M4 is at the dealer waiting for pick up. I know that market will be good. Not sure it will work as well with MAFs on that car. But I'm thinking will be pretty good for BMW knows that car is more modded by customers. Hopefully it will be more mod friendly

[m6beast]

Originally Posted by m6beast

Next week, now that CNC aluminum velocity stack filter adaptor is perfected producing a bunch next week ready to ship.
Now the other problem I have is getting filters without waiting too long. Right now I have enough for 8 intakes.

Just emailed the company to see how long of a wait for a larger order for I'll be working on this style intake for the M4. M4 is at the dealer waiting for pick up. I know that market will be good. Not sure it will work as well with MAFs on that car. But I'm thinking will be pretty good for BMW knows that car is more modded by customers. Hopefully it will be more mod friendly

Pics of another F10 M5 CP with my intake

[MDM]

How and where do I go to place an order for this intake system for a 2013 M5 as well as see detailed pictures of this system?

[m6beast]

Originally Posted by MDM

How and where do I go to place an order for this intake system for a 2013 M5 as well as see detailed pictures of this system?

Sent you a pm

[M5TXGuy]

Originally Posted by m6beast

Pics of another F10 M5 CP with my intake

No pics attached

[m6beast]

Originally Posted by M5TXGuy

No pics attached

Sorry for some reason didn't up load I'll post it again

[Spinny02]

Looks great!!!!! Does it fit with night vision ?

[m6beast]

Originally Posted by Spinny02

Looks great!!!!! Does it fit with night vision ?

Not sure had someone else pm me the same question but I can make adjustments. Will go to the dealer and see how the night vision is set up. If anything I can extend the filters a little further closer to the center.

Then it will also be about how aesthetically pleasing as is the power gains. I will do some research and see if it will work as is and what adjustments need to be made.

The velocity stack is CNC cut out of a block of aluminum so all that needs to be added is further piping and still be able to get the right angle to keep the ram air consistent as original design.

[m6beast]

Originally Posted by Spinny02

Looks great!!!!! Does it fit with night vision ?

Looked it up doesn't look to promising but maybe the night vision can be moved in a different location. I will look at it and draw up some different designs and see what would look good and still keep its factory look.

I hate that it might not work for those with night vision but that won't stop me from trying to design a different set up.

[m6beast]

Originally Posted by DCT OFF

Went to the local track yesterday with my none competition package M5 and finally get to put M6beast intake to the true test,my previous runs with stock intake,BMS set at 3.5 and Turner axle back exhaust was averaging 12's.I had just get off the highway so my tires was heated up pretty good,I attempt My first run with the M6beast intake ran a 11.7 @ 121mph with a 60 foot of 1.9,after that I started to have traction issues,I just need to continue to work on my 60 foot,Once again I am very happy with the result compared to the stock intake because my times went down and mph went up,should be going back to the track this weekend to do some more testing.

Here's his time slips from last night after letting the intake fully adapted. This intake breaths so well it takes a while to get its full potential do to increased MPH per gain.

Here with similar 60 ft and another week of adaption time showed a huge improvement. This intake is something you have to experience to believe it. No matter what I post in data you will doubt the true feeling till you have one. I can say the ones who have will speak for themselves.

Here's his track times.

Before intake best 12.0 @ 120 MPH
After intake with only a couple days of adaptation 11.7 @ 121 MPH
After Intake with another week of adaptation 11.5 @ 124 MPH

[JoM3z]

George, what other mods aside from the intake do you have on these runs?

Originally Posted by m6beast

Here's his time slips from last night after letting the intake fully adapted. This intake breaths so well it takes a while to get its full potential do to increased MPH per gain.

Here with similar 60 ft and another week of adaption time showed a huge improvement. This intake is something you have to experience to believe it. No matter what I post in data you will doubt the true feeling till you have one. I can say the ones who have will speak for themselves.

Here's his track times.

Before intake best 12.0 @ 120 MPH
After intake with only a couple days of adaptation 11.7 @ 121 MPH
After Intake with another week of adaptation 11.5 @ 124 MPH

[m6beast]

Originally Posted by JoM3z

George, what other mods aside from the intake do you have on these runs?

These runs were just the intake after giving it a week or so to fully adapt, no other mods were added.

His best was 12.0 @ 120 mph with these mods

BMS 3.5 boost
Factory intake
BMS filters
Charcoal filter delete
Rpi ram air scoops
Turner muffler delete
E midsection
Stock cats

[M5TXGuy]

George, have you not run your beast with all your mods plus the new intake yet?

[m6beast]

Originally Posted by M5TXGuy

George, have you not run your beast with all your mods plus the new intake yet?

Yes having traction issues, even with drag radials. Trying to find the right tire pressure and burn out. I also did a firmware upgrade for testing and going to Dyno and see the difference.

I can say the intake made more gains for the M6 than the M5 because its more efficient do to no cats and muffler delete. Dyno runs proved it as well. Suppose to go Dyno this week or next week with Terry's new firmware to compare the difference.

I still can't break 11.0's I guess I'm stuck there.

[m6beast]

For those who are asking if the intake will work for night vision, I'm working on an attachment for a customer that also has night vision. Basically it will extend the filter a couple inches closer to the center of the kidneys. Not that much but just enough to clear it so the filter can have the same angle. Might take a couple of days for a design to get it just right.

Will post some pics when I'm done

[rlsl]

PM sent!!

[MpowerMike]

If the intakes are ready for sale can you please post prices or even make a group buy?

[m6beast]

Originally Posted by MpowerMike

If the intakes are ready for sale can you please post prices or even make a group buy?

Hard to do a group buy because I have limited filters and had to special order for larger volume. That said I'm giving all forum members discounted price. Those interested have sent me pm. I've been sending them info by email with all data, documentation, pics, everything they need with discounted price which includes shipping plus free install and Dyno. If too far away price is still the discounted price with shipping included.

[movemnt Inc]

Originally Posted by m6beast

Hard to do a group buy because I have limited filters and had to special order for larger volume. That said I'm giving all forum members discounted price. Those interested have sent me pm. I've been sending them info by email with all data, documentation, pics, everything they need with discounted price which includes shipping plus free install and Dyno. If too far away price is still the discounted price with shipping included.

Hey G, guess you've been really caught up with your production.. Let me via email when you're ready to ship! . Been waiting !!

[m6beast]

Well my buddy who installed my intake called me last night with some new gains from raising the boost from 3.5 to 4.0 boost.

He reduced his 1/4 mile time by .1 second and gained 1 mph from going from 3.5lb boost to 4.0lb boost same 60ft.

This shows how much power the intake is making. From just installing the intake and giving it time to fully adapt he knocked off .5 seconds and gained 4-5 mph.

Good Job Man!