Socal (long beach area) MAP sensor change...

[apexlocator]

Can someone recommend a shop/person? Currently running 3.5 MAP sensors on my intake manifolds. I need to go back to 2.5 bar sensors for smog(I'm back on stock tune and its throwing a CEL).

My goto shop EAS (Anaheim) is a bit high, but they're pulling the quote base off of shop manuel, since they work on a lot of BMW models.

I've read that others have done in 1-2 hrs....just trying to find a good source. Dont have the time to tackle this myself. Thanks.

ap

[M6Roar]

Originally Posted by apexlocator

Can someone recommend a shop/person? Currently running 3.5 MAP sensors on my intake manifolds. I need to go back to 2.5 bar sensors for smog(I'm back on stock tune and its throwing a CEL).

My goto shop EAS (Anaheim) is a bit high, but they're pulling the quote base off of shop manuel, since they work on a lot of BMW models.

I've read that others have done in 1-2 hrs....just trying to find a good source. Dont have the time to tackle this myself. Thanks.

ap

Or you can get BM3 if you dont have it already go to the setting for your own stock tune and change the parameter to 3.5 MAP, which ever is cheaper for you. 10mins job lol

[apexlocator]

So this would get rid of my CEL on stock tune with the 3.5 bar MAP?

[M6Roar]

It will readjust your stock map to run 3.5 so I would say 100% if your CEL was caused by it, also you can switch off any code you get. You can check with BM3 too