M6beast MSR Intake data

[PhilT3]

Originally Posted by m6beast

Well my buddy who installed my intake called me last night with some new gains from raising the boost from 3.5 to 4.0 boost.

He reduced his 1/4 mile time by .1 second and gained 1 mph from going from 3.5lb boost to 4.0lb boost same 60ft.

This shows how much power the intake is making. From just installing the intake and giving it time to fully adapt he knocked off .5 seconds and gained 4-5 mph.

Good Job Man!

Any other mods?

[m6beast]

Originally Posted by PhilT3

Any other mods?

His mods before intake were JB3 3.5 lb boost, BMS filters, charcoal filter delete, RPI ram air scoops, E mid section with turner muffler delete, OEM Cats.
His best run was 12.0 @ 120 mph.
After intake install and a couple weeks of adaption ran his best 11.5 @ 124/125 mph

Since then raised the boost a two weeks ago from 3.5 to 4lb boost and ran 11.4 @ 125 mph so gives some light on how much the intake performs compared to boost

[m6beast]

Originally Posted by Spinny02

Looks great!!!!! Does it fit with night vision ?

just finished the Night vision CNC cut Velocity stack. Now will test fit for the green light. Have a customer waiting on this setup after he's meth is adapted will be sending it out

[Spinny02]

Originally Posted by m6beast

just finished the Night vision CNC cut Velocity stack. Now will test fit for the green light. Have a customer waiting on this setup after he's meth is adapted will be sending it out

Great news thanks for the update.

[m6beast]

Originally Posted by Spinny02

Great news thanks for the update.

If you still interested let me know so I can have another velocity stack CNC cut so there are no delays. Takes some time to get those done.

[m6beast]

Originally Posted by m6beast

Yes having traction issues, even with drag radials. Trying to find the right tire pressure and burn out. I also did a firmware upgrade for testing and going to Dyno and see the difference.

I can say the intake made more gains for the M6 than the M5 because its more efficient do to no cats and muffler delete. Dyno runs proved it as well. Suppose to go Dyno this week or next week with Terry's new firmware to compare the difference.

I still can't break 11.0's I guess I'm stuck there.

Well finally got this bad boy to hook and you can see how much the intake made a difference, Before my intake install I ran 4 runs 11.0 @ 127 mph with average 1.72 60ft and a best 1.68 60ft.

After my intake install I could never get a good launch do to too much wheel spin. So I decided to swap tires to a 315 30 20 TOYO R888's from my previous 285 35 20 TOYO R888's.

So on my very first pull I decided to just get a feel for the track and do launch control. Very first run 11.0 @ 129 MPH. Second run same thing with both 1.8's 60ft.

So I said what the hell lets launch like we did in the past since it seems to be launching hard and no wheel spin. First run 10.95 @ 128.88 mph 1.82 60ft. "Hell yeah I was ecstatic!"

So went for my 4th run 10.84 @ 129.12 MPH 1.67 60ft. I was like damn she's running stronger.

Then on my 5th run of the night 10.77 @ 128.81 1.62 60ft. Its funny cause that run I definitely wasn't expecting such a good run cause I stayed in second gear to long and the car delayed into third. I bet I could have gotten a 10.6 with that last one.

So Looking at all my runs before and after Intake it proves how much it made a difference especially from before of 11.0 127 mph and a best 1.68 60ft. With my intake it lowered times to a 10.7 and increased mph to 129 plus an awesome 1.62 60ft. This really shows how well the throttle response is on the intake which has made the gas pedal more sensitive and another reason harder to get traction. That should say a lot how much power she's making for such, a low 60ft time and high mph.

I ran my buddies M5 that night to see what I could get for him. His average was 11.5 124/125 MPH all night with a 1.9/2.0 60ft.
So I launched his car the way I do my M6 and got 11.4 @123 MPH and 1.7 60ft. So this also shows how strong and consistent my M6 was running for not losing much in mph and kept running stronger by the pull.

The ones that have the intake have seen and felt a difference. It's a mod you'll have to experience to believe it.

Hope to see more in the 10's.

G

[boots]

Spinny your next for this update!

[m6beast]

Originally Posted by boots

Spinny your next for this update!

I'm flying out to NY to install the nihhtvision set up on a customers car to make sure it fits perfect and see first hand if there's any adjustments. After doing some measuring and testing here I believe I have the perfect set up for night vision . But being so anal I feel I have to do this install myself to make sure and perfect the adaptor if needed.

He's adapting his meth meth kit with my charge pipes so once it's adapted I'll be flying out. I'll keep you guys in the loop as things progress.

G

[RichardCranium]

Originally Posted by m6beast

I'm flying out to NY to install the nihhtvision set up on a customers car to make sure it fits perfect and see first hand if there's any adjustments. After doing some measuring and testing here I believe I have the perfect set up for night vision . But being so anal I feel I have to do this install myself to make sure and perfect the adaptor if needed.

He's adapting his meth meth kit with my charge pipes so once it's adapted I'll be flying out. I'll keep you guys in the loop as things progress.

G

Too cold up there fly to Florida and put it on my car!..Haha!

[m6beast]

Originally Posted by RichardCranium

Too cold up there fly to Florida and put it on my car!..Haha!

Lol might have to I don't like the cold!

[EM1]

Interested in the intake. Left u a PM. Also in south Florida

[m6beast]

Originally Posted by EM1

Interested in the intake. Left u a PM. Also in south Florida

I sent you a PM and also emailed you the info, take care!
G

[MpowerMike]

M6BEAST i still didn't get a PM from you on how much the intakes are with the night vision option

[patb23]

Originally Posted by MpowerMike

M6BEAST i still didn't get a PM from you on how much the intakes are with the night vision option

I've been waiting for pricing for over 2mos. I've sent him email and texts.

[m6beast]

Originally Posted by patb23

I've been waiting for pricing for over 2mos. I've sent him email and texts.

I appilogixe Pat I thought I sent you an email a while ago and never got a response back so I thought you were setting your car up and you would let me know when you get it back. I'll send it again.

[m6beast]

Originally Posted by MpowerMike

M6BEAST i still didn't get a PM from you on how much the intakes are with the night vision option

Hey MpowerMike as for nightvision still waiting on customer in NY to test fit nightvision option before I market in the mean time I can send you all the data and info for now pm your email and I'll send it out
Thanks again and sorry for the delay
Hope you have a great evening
G

[bm5bullit]

M6BEAST I would like a PM from you on how much the intakes for a 13 M5 without the night vision. Great read.

[m6beast]

Originally Posted by bm5bullit

M6BEAST I would like a PM from you on how much the intakes for a 13 M5 without the night vision. Great read.

Just PMed you
Thanks for your interest
G

[bm5bullit]

Originally Posted by m6beast

Just PMed you
Thanks for your interest
G

Nothing has come thru. Can you please re-send?

[m6beast]

Originally Posted by bm5bullit

Nothing has come thru. Can you please re-send?

Check your PM

[m6beast]

Originally Posted by m6beast

Check your PM

Any one interested send me an email at info@mstreetracing.com

Take care
G

[Grayblack]

Has anyone in SoCal installed this intake yet? I'd like to hear it in person if possible.