|
Post Reply |
|
Thread Tools | Search this Thread |
11-22-2016, 04:30 PM | #1 |
Second Lieutenant
61
Rep 294
Posts |
How to elimate break squeal on Carbotech pads Ct1648-1521 ?
Anyone experienced break squeal on the Carbotech pads front/back Ct1648-1521 ? Any tricks to remove the squeal when coming to a stop? Also have a rotating brake squeak when car is driving at <20mph without pressing the brakes.
I was going to try this? https://www.amazon.com/gp/product/B0...A37KLPQG0QTZGU
__________________
2019 F90 M5 Competition - Marina bay Blue Pearl - Executive and Bowers & Wilkins package
Gone:2013 F10 M5-DCT-Montecarlo Pearl Blue-BBMR 800 Stage 1 system 700whp+(93oct) 2004 Lamborghini Gallardo-Manual-Giallo Midas Pearl Yellow-Modified 2018 Range Rover Velar S-White |
11-23-2016, 11:18 AM | #3 |
Lieutenant
167
Rep 501
Posts |
Use Meguiars "Hot Wheels" cleaner and spray everything with a thick coat. Use a brush to clean the calipers. Then repeat.
Chances are it's leftover residue from stock brakes causing the noise. It will disappear over ~1000 miles. But you need to thoroughly clean all components. No bedding necessary with 1521's. Best, Brad
__________________
2016 McLaren MSO 570S | 2018 Ford Raptor | @alpha7even
|
Appreciate
0
|
11-25-2016, 11:34 AM | #4 | |
Captain
156
Rep 598
Posts |
Quote:
|
|
Appreciate
0
|
11-25-2016, 12:00 PM | #5 | ||
Lieutenant
167
Rep 501
Posts |
Quote:
__________________
2016 McLaren MSO 570S | 2018 Ford Raptor | @alpha7even
|
||
Appreciate
0
|
11-25-2016, 12:20 PM | #6 | |
Captain
156
Rep 598
Posts |
I don't need to call them. The correct info is posted on their site.
All new brake pads require a bedding process... http://www.ctbrakes.com/faqs.asp#bedding4 Quote:
At any rate Carbontech's website states bedding procedures in their FAQ. http://www.ctbrakes.com/faqs.asp#bedding1 And not to discount your suggestion completely, I don't think any spray can removed baked uneven pad material from a rotor surface without also melting away your pads in the process. |
|
Appreciate
0
|
11-25-2016, 05:40 PM | #7 |
Lieutenant
167
Rep 501
Posts |
I replaced my stock pads at 33k miles, kept the stock rotors, and what I outlined worked for me. Of course YMMV, but I'm not going to get into a pissing match with you about it. Are you even using 1521's?
__________________
2016 McLaren MSO 570S | 2018 Ford Raptor | @alpha7even
|
Appreciate
0
|
11-25-2016, 05:44 PM | #8 |
Lieutenant
167
Rep 501
Posts |
Also note that the link you referenced explicitly EXCLUDES the 1521. Why I said call them directly to verify. I had this exact conversation and they told me "No bedding necessary. Squealing and dust will reduce over ~1k miles or a few months as the stock pad material is removed from your rotors."
If he has never thoroughly cleaned components, it will help.
__________________
2016 McLaren MSO 570S | 2018 Ford Raptor | @alpha7even
|
Appreciate
0
|
11-27-2016, 07:22 PM | #9 |
Captain
156
Rep 598
Posts |
Right. That's what I quoted. It excludes 1521s because their procedures are for track use. Meaning, they don't want to be on the hook legally for telling someone to do this on the street.
Not trying to piss. But wrong info is wrong info. It worked for you because you apparently drove 1000 miles after installation. That effectively gives you the same effect of bedding. |
Appreciate
0
|
04-11-2017, 12:15 PM | #10 |
Second Lieutenant
61
Rep 294
Posts |
I give up on the carbontech way too noisy and not low dust (just lower than oem)
anyone try these? http://www.powerstop.com/product/pow...3&mk=BMW&mo=M5
__________________
2019 F90 M5 Competition - Marina bay Blue Pearl - Executive and Bowers & Wilkins package
Gone:2013 F10 M5-DCT-Montecarlo Pearl Blue-BBMR 800 Stage 1 system 700whp+(93oct) 2004 Lamborghini Gallardo-Manual-Giallo Midas Pearl Yellow-Modified 2018 Range Rover Velar S-White Last edited by steeve13m; 04-11-2017 at 12:23 PM.. |
Appreciate
0
|
04-11-2017, 01:02 PM | #11 | |
Major
682
Rep 1,123
Posts |
Quote:
|
|
Appreciate
0
|
04-11-2017, 01:04 PM | #12 | |
Second Lieutenant
61
Rep 294
Posts |
Quote:
I just purchased the Z17's full ceramic lowest brake dust apparently...keep u posted
__________________
2019 F90 M5 Competition - Marina bay Blue Pearl - Executive and Bowers & Wilkins package
Gone:2013 F10 M5-DCT-Montecarlo Pearl Blue-BBMR 800 Stage 1 system 700whp+(93oct) 2004 Lamborghini Gallardo-Manual-Giallo Midas Pearl Yellow-Modified 2018 Range Rover Velar S-White |
|
Appreciate
0
|
04-11-2017, 09:17 PM | #14 |
Second Lieutenant
61
Rep 294
Posts |
__________________
2019 F90 M5 Competition - Marina bay Blue Pearl - Executive and Bowers & Wilkins package
Gone:2013 F10 M5-DCT-Montecarlo Pearl Blue-BBMR 800 Stage 1 system 700whp+(93oct) 2004 Lamborghini Gallardo-Manual-Giallo Midas Pearl Yellow-Modified 2018 Range Rover Velar S-White |
Appreciate
0
|
04-11-2017, 10:02 PM | #15 |
Major General
4065
Rep 5,231
Posts |
Do you know if there's a difference between pads on a 13' and LCI's; went on the website and found PN for 13 but I was unable to find for 15'.
__________________
CURRENT: 22' INDIVIDUAL M5| CHALK | TARTUFO | CCB | MPE | H&R | IND
GONE: 19' M5C| SINGAPORE GREY| ARAGON|VELOS VLS-06|H&R|iPE|IND|XPEL|CF|RADENSO GONE: 15' F10 M5|BSM|BLACK|VELOS VSS-S2|KW|AKRA|IND|CF |ESCORT 360|VELOS PIGGY GONE: 13' F10 M5|SG|BLACK|AKRA|KW|IND LONG GONE: 09' E60 M5|02' E39 M5 |
Appreciate
0
|
04-12-2017, 02:33 AM | #16 |
Captain
184
Rep 788
Posts |
Did you check that ll the pistons are free and the hand brake mech was released and reset properly? Its common to have a stick piston and the main cause off vibrations and noise.
|
Appreciate
0
|
04-20-2017, 10:08 PM | #17 | |
Banned
536
Rep 2,825
Posts |
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|