Data Log Bimmerlink

[Danishp97]

https://drive.google.com/file/d/1J6z...w?usp=drivesdk


Hi! Can anyone here give me an opinion on this log? I logged my stage 2 M6. Car drives fine, my concern is that this log shows misfire detection counter on cylinder 1 as 1 if you scroll down while on other cylinders its 0. Is this normal? Car has no codes as drives absolutely fine!
Also would anyone tell me if anything else looks off? Or is it perfect? Cheers!

[fstm5]

Originally Posted by Danishp97

https://drive.google.com/file/d/1J6z...w?usp=drivesdk


Hi! Can anyone here give me an opinion on this log? I logged my stage 2 M6. Car drives fine, my concern is that this log shows misfire detection counter on cylinder 1 as 1 if you scroll down while on other cylinders its 0. Is this normal? Car has no codes as drives absolutely fine!
Also would anyone tell me if anything else looks off? Or is it perfect? Cheers!

Cant open that link on iPhone, but regarding misfire detection on BIMMERLINK, I fairly think it’s incorrect, and it’s detecting false misfires, I do tend to get misfire counts on my car as well when the car is not misfiring, and occasional misfire is understandable but my car does not misfire at all, so I’ve come to the conclusion that BIMMERLINK is just incorrect, also with the oil pressure gauge.

[Danishp97]

Originally Posted by fstm5

Cant open that link on iPhone, but regarding misfire detection on BIMMERLINK, I fairly think it’s incorrect, and it’s detecting false misfires, I do tend to get misfire counts on my car as well when the car is not misfiring, and occasional misfire is understandable but my car does not misfire at all, so I’ve come to the conclusion that BIMMERLINK is just incorrect, also with the oil pressure gauge.

Makes sense. My oil pressure for the entire log reads 0 psi

[fstm5]

Originally Posted by Danishp97

Makes sense. My oil pressure for the entire log reads 0 psi

Mines shows 7, if we were at 0 or 7 psi our engines would be blown
90% of the things on BIMMERLINK are accurate but I feel like the things that aren’t, are gauges that the car doesn’t have a sensor to read.

[Danishp97]

Originally Posted by fstm5

Mines shows 7, if we were at 0 or 7 psi our engines would be blown
90% of the things on BIMMERLINK are accurate but I feel like the things that aren’t, are gauges that the car doesn’t have a sensor to read.

Thanks for the insight! Btw you can download the log on the iphone and open in numbers app which inbuilt. Incase you want to go through

[fstm5]

Originally Posted by Danishp97

Thanks for the insight! Btw you can download the log on the iphone and open in numbers app which inbuilt. Incase you want to go through

Are your readings for boost etc bar or psi ?

[Danishp97]

Originally Posted by fstm5

Are your readings for boost etc bar or psi ?

They’re bar

[fstm5]

Originally Posted by Danishp97

They’re bar

What stage 2 are you on?

[Danishp97]

Originally Posted by fstm5

What stage 2 are you on?

Etuners Greece custom map

[stunatu72]

Originally Posted by fstm5

Mines shows 7, if we were at 0 or 7 psi our engines would be blown
90% of the things on BIMMERLINK are accurate but I feel like the things that aren’t, are gauges that the car doesn’t have a sensor to read.

So bimmerlink oil pressure PSI readings not to be counted on, ever? I see 15 psi when engine off regardless of when the reading its taken. At idle about 38-40, but also notice it spike to 100-110 psi when pushing the car. No warning lights in iDrive but I also don't know the oil pressure PSI range for a B58 engine. Any clue where I could find that?