Anyone here get full European Anti Dazzle working?

[smithf80]

Hey everyone,

I've been coding the newer F80's for full EU spec ant dazzle, but it seems like the process might be a little different on the F10.

I removed 5AP and 8S4 and VO coded both TMS, LHM, FLA, FEM and ICM.

On the F80's there are some manual changes you need to make in the TMS modules but it seems like you're not supposed to do that for this car.

[Speed808Ix]

Yes in Chicago got it to work my coder is local to here on bimmerpost

[smithf80]

Originally Posted by speed808ix

Yes in Chicago got it to work my coder is local to here on bimmerpost

I wonder if he is willing to share what he did lol, if anything different than what I did.

[Speed808Ix]

This all that needs to be done for coding f10/f06 with LED Headlights


** To code no-dazzle back into high beam assistant on F10/F06:

Step 1. Remove regional-specific options that eliminate this functionality
-> Edit FA (VO) and remove 5AP and 8S4 from the SALAPA-element

Step 2. VO Code FRM ECU Module:
-> Connect -> Read FA (VO) -> Activate FA (VO) -> Read SVT (VCM) -> Right-Click on the FRM node (the FRM ECU itself not the underlying CAFD) -> Select CODE

Step 3. VO Code KAFAS2 ECU Module:
-> Connect -> Read FA (VO) -> Activate FA (VO) -> Read SVT (VCM) -> Right-Click on the KAFAS2 node (the KAFAS2 ECU itself not the underlying CAFD) -> Select CODE

Step 4: Edit or verify that HU_NBT -> 3000 -> HIGH_BEAM_ASSISTANT =akiv "

--------------------------------------------------------------------------------------------
QUOTE=dbworld4k;18397074]I coded OP's car. I removed 8S4 and 5AP, then VO coded all the modules except DME as required.

I know the F80/82 VLD coding requires modifications to certain parameters in the LHM module:
LHM [43]
M1 init_US_F025-->init_ECE_F030
M2 init_US_F025-->init_ECE_F030
M3 init_US_F025-->init_ECE_F030
M4 init_US_F025-->init_ECE_F030
M14 init_US_F030-->init_ECE_F030
M15 init_US_F030-->init_ECE_F030

LHM [44]
M1 init_US_F025-->init_ECE_F025
M2 init_US_F025-->init_ECE_F025
M3 init_US_F025-->Unknown, Werte= FA, FA, 00, 19, FA, FA, 00
M4 init_US_F025-->init_ECE_F030
M6 init_ECE_F030_RL-->init_ECE_F030
M7 init_ECE_F030_RL-->init_ECE_F030
M8 init_ECE_F030_RL-->init_ECE_F030
M9 init_ECE_F030_RL-->init_ECE_F030
M14 Unknown-->init_ECE_F030
M15 Unknown-->init_ECE_F030

I was told for the F10 M5 those parameters need not be changed. Can someone verify this?

This is what was posted last that made it work

[smithf80]

Originally Posted by speed808ix

This all that needs to be done for coding f10/f06 with LED Headlights


** To code no-dazzle back into high beam assistant on F10/F06:

Step 1. Remove regional-specific options that eliminate this functionality
-> Edit FA (VO) and remove 5AP and 8S4 from the SALAPA-element

Step 2. VO Code FRM ECU Module:
-> Connect -> Read FA (VO) -> Activate FA (VO) -> Read SVT (VCM) -> Right-Click on the FRM node (the FRM ECU itself not the underlying CAFD) -> Select CODE

Step 3. VO Code KAFAS2 ECU Module:
-> Connect -> Read FA (VO) -> Activate FA (VO) -> Read SVT (VCM) -> Right-Click on the KAFAS2 node (the KAFAS2 ECU itself not the underlying CAFD) -> Select CODE

Step 4: Edit or verify that HU_NBT -> 3000 -> HIGH_BEAM_ASSISTANT =akiv "

--------------------------------------------------------------------------------------------
QUOTE=dbworld4k;18397074]I coded OP's car. I removed 8S4 and 5AP, then VO coded all the modules except DME as required.

I know the F80/82 VLD coding requires modifications to certain parameters in the LHM module:
LHM [43]
M1 init_US_F025-->init_ECE_F030
M2 init_US_F025-->init_ECE_F030
M3 init_US_F025-->init_ECE_F030
M4 init_US_F025-->init_ECE_F030
M14 init_US_F030-->init_ECE_F030
M15 init_US_F030-->init_ECE_F030

LHM [44]
M1 init_US_F025-->init_ECE_F025
M2 init_US_F025-->init_ECE_F025
M3 init_US_F025-->Unknown, Werte= FA, FA, 00, 19, FA, FA, 00
M4 init_US_F025-->init_ECE_F030
M6 init_ECE_F030_RL-->init_ECE_F030
M7 init_ECE_F030_RL-->init_ECE_F030
M8 init_ECE_F030_RL-->init_ECE_F030
M9 init_ECE_F030_RL-->init_ECE_F030
M14 Unknown-->init_ECE_F030
M15 Unknown-->init_ECE_F030

I was told for the F10 M5 those parameters need not be changed. Can someone verify this?

This is what was posted last that made it work

Ah so you do need to make those other changes like you do on the F80 then? I wasn't sure because I figured there would be another setting like init_ECE_F10 or something else, didn't want to go putting F030 related variables, but I'll try it.

[Speed808Ix]

Originally Posted by smithf32

Ah so you do need to make those other changes like you do on the F80 then? I wasn't sure because I figured there would be another setting like init_ECE_F10 or something else, didn't want to go putting F030 related variables, but I'll try it.

yeah this is what worked for us and it works like a champ over 45 mph only!

[smithf80]

Originally Posted by speed808ix

yeah this is what worked for us and it works like a champ over 45 mph only!

Awesome, thanks!