12-28-2017, 01:42 AM | #1 |
Private First Class
26
Rep 169
Posts |
DCT Clutch Replacement Quote
Hi guys,
I have a stock M5 CP with a DCT. I'm just over the 52k mark and noticing my clutch is slipping in 6 above 3/4k rpms under heavy load. The dealership quoted me $8000 to replace the clutches. This sounds crazy since the stock clutch assembly (basket and clutches) online average $2500. From what I can tell the labor its ~10 hours. Is the dealer way over priced or is this what I should expect as a replacement cost? I tried calling some indy's here in Chicago, but they didn't have time to quote. Also if anyone knows a reputable indy in Chicago i'd appreciate it. Thanks in advance |
12-28-2017, 03:54 AM | #4 |
Second Lieutenant
30
Rep 232
Posts |
See it now, I missed that detail. I recall my indy mechanic quoting me 10 hours of labor for this job if I decided to go the SSP clutch route in the future. At $150 an hour that comes to maybe 1800 at the most if you factor in fluids. SSP drop in 900lb ft clutches are around 2600, and ECS sells the stock replacement clutch pack for 2700.
|
Appreciate
0
|
12-28-2017, 04:48 AM | #6 |
Second Lieutenant
30
Rep 232
Posts |
Yes, mine was replaced with a stock DCT unit when it was under factory warranty. You might as well upgrade to SSP clutches for future longevity. Bavarian Motors or Wizard Werks in Chicago. My Indy shop is located in Louisville, KY, 5 hours South of you.
|
Appreciate
0
|
12-30-2017, 06:48 AM | #12 |
Major General
4074
Rep 5,233
Posts |
SSP’s the better route for the $ IMO; good luck.
__________________
CURRENT: 22' INDIVIDUAL M5| CHALK | TARTUFO | CCB | MPE | H&R | IND
GONE: 19' M5C| SINGAPORE GREY| ARAGON|VELOS VLS-06|H&R|iPE|IND|XPEL|CF|RADENSO GONE: 15' F10 M5|BSM|BLACK|VELOS VSS-S2|KW|AKRA|IND|CF |ESCORT 360|VELOS PIGGY GONE: 13' F10 M5|SG|BLACK|AKRA|KW|IND LONG GONE: 09' E60 M5|02' E39 M5 |
Appreciate
0
|
12-30-2017, 01:39 PM | #13 | |
Lieutenant
95
Rep 587
Posts |
Quote:
they are good people and actually care 800-831-1117 explain that your just outve warr and...... Neil |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|