|
Post Reply |
|
Thread Tools | Search this Thread |
12-11-2015, 08:59 PM | #1 |
Major
206
Rep 1,250
Posts
Drives: 20' X3M CP
Join Date: Oct 2013
Location: SoCal
|
Good news for those with 2015+ CP (10.5inch Factory rims)
Not sure how many knew this but the CP wheels (Black) have 10.5 inch wheels in the rear not 10.
Also, http://www.stevethomasbmw.com/new/BM...a62d94c6f3.htm I spoke to our buddies @ Steve Thomas I know they sell a bunch of us cars on the forum and help with parts, and they confirmed. So this would mean guys with 2015+ CP Black wheels can go bigger than 305s on factory wheels. Not going to lie, this is awesome news. Before I pull the trigger if this is incorrect please let me know. Thanks .
__________________
2020 X3M CP - IND Reflector set | Ceramic Tint
Retired:2015 M5 CP MSR Intake|Carbon Fiber Fender Vents|Meisterschaft GTC catback with LXR mid pipes and ER Catless DPs | BPMSPORT Stage II Tune | RKP Rear Diffuser and Challenge Center piece |RKP Front Lip| Painted Reflectors | H&R Springs | Strasse SM5R Carbon Fiber Wheels | Nitto R888 | Last edited by combatbmw; 12-11-2015 at 09:12 PM.. |
12-11-2015, 11:07 PM | #3 |
Major General
1125
Rep 6,064
Posts |
We have discussed about this subject a lot. Just make sure you get the right part number:
M5 343M: ALLOY RIM FORGED 9JX20 ET:32 ... 36112283999 ALLOY RIM FORGED 10JX20 ET:34 ... 36112283401 ALLOY RIM FORGED 9JX20 ET:32 ... 36112284599 Color: matt black ALLOY RIM FORGED 10JX20 ET:34 ... 36112284602 Color: matt black M6 343M: ALLOY RIM FORGED 9,5JX20 ET:31 ... 36112283402 ALLOY RIM FORGED 10,5JX20 ET:19 ... 36112283403 ALLOY RIM FORGED 9,5JX20 ET:31 ... 36112284707 Color: matt black ALLOY RIM FORGED 10,5JX20 ET:19 ... 36112284708 Color: matt black M5 601M: Gloss-turned light alloy rim 9JX20 ET:32 ... 36112284870 Gloss-turned light alloy rim 10JX20 ET:34 ... 36112284871 M6 601M: Gloss-turned light alloy rim 9,5JX20 ET:31 ... 36112284872 Gloss-turned light alloy rim 10,5JX20 ET:19 ... 36112284873
__________________
Current : 2020 F92 Black Sapphire M8 - ZF8
Gone : 2018 F80 Mineral Gray M3 - 6MT Gone : 2016 F82 Austin Yellow M4 - 6MT Gone : 2013 F13 Sakhir Orange M6 -7DCT Gone: 2013 F13 Alpine White 650i -ZF8 |
Appreciate
0
|
12-12-2015, 01:21 AM | #4 | |
Major
206
Rep 1,250
Posts
Drives: 20' X3M CP
Join Date: Oct 2013
Location: SoCal
|
I appreciate this info, I'll keep you guys posted.
Quote:
__________________
2020 X3M CP - IND Reflector set | Ceramic Tint
Retired:2015 M5 CP MSR Intake|Carbon Fiber Fender Vents|Meisterschaft GTC catback with LXR mid pipes and ER Catless DPs | BPMSPORT Stage II Tune | RKP Rear Diffuser and Challenge Center piece |RKP Front Lip| Painted Reflectors | H&R Springs | Strasse SM5R Carbon Fiber Wheels | Nitto R888 | |
|
Appreciate
0
|
12-23-2015, 11:13 AM | #5 |
Colonel
1310
Rep 2,349
Posts |
The issue is 19mm offset on the 10.5" wheels for the M6. All M5 wheels are 34mm offset. This means a 305mm on 19mm offset wheel is going to be really aggressive
|
Appreciate
0
|
03-15-2017, 12:59 PM | #7 |
Lieutenant Colonel
117
Rep 1,625
Posts |
Is anyone running the M6 601M's on their M5?
It seems seem doable, the fronts keep the same offset but pick up +.5" on wheel width and the rears would be be like running a +15mm spacer and and another .5" on wheel width? Any advice or pictures appreciated? My car has the comp. pack so I am 20mm lower than stock. EDIT: NVM, found answer! http://f10.m5post.com/forums/showthread.php?t=1222857
__________________
2014 Individual /// M5 Competition AW/AB || Vorsteiner FF-103 || BMS JB4 || Meisterschaft GTC || RPI || IND || Challenge || |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|