01-10-2017, 01:36 PM | #1 |
Lieutenant
161
Rep 554
Posts |
Forgestar F14 SDC 20x9.5/20x10.5 + tires
So here's the story. I had a set of Forgestar semi concave fronts/SDC rears and had issues with the 2 fronts. I ordered 2 new fronts and went with SDC's so now I have SDC's all around. It took Forgestar close to 3 months to get the fronts SDC's to me. Unfortunately, I ended up selling my car last month before the wheels came in and now the SDC's won't fit on my current ride (wrong offset). Here's the dealio.....the 2 front SDC 20x9.5 et8 came as a raw finish because I was going to powdercoat them to match my rears which are 20x10.5 et35 in candy apple red. I'm going to sell these and have accepted that I'm going to take a big loss since the 2 fronts are brand new, never even removed from the box. Let me know if anyone has any interest in my offer: 1. Sell these as is....raw front + candy apple rears for $1600 (brand new fronts alone costs me $1200 so I'm only charging $400 for rears). 2. Paint fronts candy apple red to match rears so you'll have a full set in perfect condition for $1800. 3. Paint all 4 gunmetal or whichever color for $2000. My powdercoating place does work for Rohana, Vertini, AG, etc so they know what they're doing. Brand new SDC's will run you $2500 (SDC's costs extra) and the wait is 2-3 months. As I mentioned, these are brand new fronts, rears are 1 year old. Let me know, thx. Tires will be included for free: Hankook Ventus Evo2 245/40/20 and 275/35/20. F10's may be able to use the rears but the fronts will probably rub if lowered. Tires are over 70%. Last edited by ndinh; 02-08-2017 at 02:07 PM.. |
01-14-2017, 09:28 AM | #5 |
Lieutenant
161
Rep 554
Posts |
Et8 sounds super aggressive but it's actually recommended per Forgestar. F10 535i/550i guys normally run et10 with these SDC's. It may be about 2-4mm aggressive but will fit fine. There's a thread on the F10 non M5 boards with pics of guys with this setup. Thx.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|