MSR intake

[sinkung]

Have some question about guys who install MSR INTAKE.
I know that it's located behind the grille and I front of radiator.

My question is how do you remove it for cleaning the filter?

I'm planning to get one but still can't figure it out how to clean the filter

Thanks

[13M5F10]

Originally Posted by sinkung

Have some question about guys who install MSR INTAKE.
I know that it's located behind the grille and I front of radiator.

My question is how do you remove it for cleaning the filter?

I'm planning to get one but still can't figure it out how to clean the filter

Thanks

It's easy, remove the kidney grills, unscrew the hose clamp and take it off.

[sinkung]

Remove the kidney grille is hard. Since there is a chance to break those clip

By the way , what kinda pre-filter do you guys use?

[ur20v]

Warm car up fully i.e do it after a longish drive or leave the car in the sun and the grills come out easliy.

[sinkung]

wow never know that , thanks ur20v

[13M5F10]

Originally Posted by sinkung

Remove the kidney grille is hard. Since there is a chance to break those clip

By the way , what kinda pre-filter do you guys use?

MSR includes the filters and pre filters. I personally do not use them.

As for the kidney grill. If you use the yank and pull methods, it can be scary but it's rather easy. I've pulled mine out without any issues. You can do it after a long drive as suggested to make it easier.

The preferred method would be where you in lip the top clips of the bumper, reach in and unclip from behind.

[MCarsFan]

Originally Posted by 13M5F10

MSR includes the filters and pre filters. I personally do not use them.

As for the kidney grill. If you use the yank and pull methods, it can be scary but it's rather easy. I've pulled mine out without any issues. You can do it after a long drive as suggested to make it easier.

The preferred method would be where you in lip the top clips of the bumper, reach in and unclip from behind.

I'm going to need help on that one.. NV makes the rip method defunct..
I'm going to have to ask George..