01-19-2018, 01:01 PM | #1 |
Private First Class
26
Rep 125
Posts |
Switched Power Supply in Mirror Area?
Hi all, I'm looking to hardware my V1 and hoped someone here could point me to the right wire for a true switched power supply in the mirror area. There is a decent vid for the install on youtube, but he didn't verify if he was using switched power.
I've also had issues with a switched power supply that slowly ramps up and down to help dim lights on my old VW. That messed with the V1 quite a bit so I'd like to avoid this as well. Advice? Edit: Here's the link to the aforementioned video: Last edited by bquicksilver; 01-19-2018 at 03:44 PM.. |
01-22-2018, 12:29 PM | #2 |
Private
47
Rep 66
Posts
Drives: 2023 530i X-Drive
Join Date: Jan 2017
Location: Hope Mills, NC
|
I used Invisicords hard-wired to the rearview mirror for my V1, in both my f10 535i and f10 M5. The connection is indeed switched. I used the instructions found at the link below to install the Invisicord. Whole thing took less than 10min and is very clean.
http://www.bimmerfest.com/forums/sho...d.php?t=546557 http://invisicord.com/index.html Good luck, Danny |
Appreciate
1
bquicksilver25.50 |
Post Reply |
Bookmarks |
|
|