|04-17-2013, 07:21 AM||#1|
Join Date: Jun 2012
Location: Upstate NY
Deep Sea Blue BMW 128i - 2 Step Correction + Opti-Coat
This BMW that was detailed is actually owned by me. I bought it brand new last June with 9 miles on the odometer. I was initially looking to own a black 1 series, however there weren't any that were optioned to my liking. When my dealer told me about a deep sea blue metallic 1 series it really made me dwell on it. There was something about the name of the colour that made me envision myself looking down into the deep, blue sea. So without looking at one in person, I of course shook his hand and sealed the deal!
When it was shipped over from Connecticut, the dealer of course gave it a wash down and especially gave it a good
ole'scrubbin' on the hood. I didn't mind too much, I just couldn't wait to drive it :bounce.
But now with spring cleaning fever, I managed to sneak in a full correction and opti-coat over the weekend. I have not
opti-coated the wheels because I will be installing a new suspension and figured I'll clean and opti-coat them then, one at
I actually did an experiment with this car prior to correction. I didn't wax it...Ever. All I did was a clay-job in the
beginning, and either a weekly foam wash or an ONR wash. I wanted to see how many swirls I could induce. After 5,000
miles I was pretty impressed. The car wasn't riddled with swirls or RID's. Of course there were the existing defects from
the dealer wash, but all in all it was in great shape.
Meguiars' Cutting Pad
Meguiars' Polishing Pad
Optimum No Rinse Wash and Shine
ONR lube (1 cap to a full spray bottle of water)
IPA (For final wipedown)
Deep Sea Blue Metallic still suffers from BMW's soft clear. I found it easy to mar the paint after wiping away
compound/polish. Great care was taken to keep pads clean and used as little pressure to remove substances off the paint.
Heads up to my fellow detailers.
Ante, Onto the pictures after a wash and a clay:
1 minor defect
Nice scratch. This one required some wetsanding to get out. Given that this is my car and with only 5000 miles, I opted
not to wetsand but rather compound it out as best I could. It will be corrected later on during its life.
Some holograms that have been there since the beginning.
The taillights needed attention.
One of the 5 scratches on the hood. 4 of the RIDs extended almost all the way down the hood (Couldn't get a picture,
because, well, my camera stinks). Still trying the figure out how it only happened on the hood and nowhere else on the
Corrected! (Before Opti-Coat, after IPA wipedown)
Taillights perfected. I was really amazed by the design of these taillights. I literally spent 15 minutes looking into
them. They are clear so you can see the entire assembly including the bulbs. Fantastic design and they look great at
More paint perfection. (Before Opti-Coat, after IPA wipedown)
The sun was setting, but no worries I was able to get better sun-shots the next day after the Opti-Coat cured for 24 hours.
Some "Cyclops" pictures:
Added my own little touch, thanks to Grafixpressions. They made me a quality sticker.
Definitely going to make some little kid's day when he sees a "transformer" in front of him.
It took me 14 hours from start to finish. I would have taken me about an hour less if I didn't spend so much time gawking
at the paint after I finished polishing a section. This is my favourite colour bar none.
Gratitude for reading.
I detail by referral only.
2012 BMW 128i 6MT Deep Sea Blue Metallic
|Thread Tools||Search this Thread|