Quote:
Originally Posted by Dwaynos
I only used 5mm spacers but they came with extended wheel bolts. I used the original locking bolts because there was enough length on them to get a good number of turns. Anything more than 5mm though and you'll need a full set.
|
Quote:
Originally Posted by M5theonlyone
Quote:
Originally Posted by Speenybean
Is is necessary to add extended wheels studs when putting on spacers? I know I have to use extended lug nuts but wasn't sure if studs were a requirement. If so 70mm? Thanks guys
|
It's necessary for your safety, just add the width of your spacers to the measurement of the standard ones and you know what ones you have to purchase including the locking wheel lug. |
Quote:
Originally Posted by Dwaynos
I only used 5mm spacers but they came with extended wheel bolts. I used the original locking bolts because there was enough length on them to get a good number of turns. Anything more than 5mm though and you'll need a full set.
|
I'm not speaking on behalf of extended lug nuts. I know they're required and most spacer kits come with them. I'm speaking specifically on extended wheel studs.