Quote:
Originally Posted by JaybeM5
Not sure I have the answer. If we have continuity through the cables what else can stop the coils from getting power ? does the load shedding relay feed all coils ? and I presume if feeds power through the DME first ? You hardly have a wiring diagram for the coils and where they get their power from. Ideally showing colours of the cables too. I know I'm asking alot !
|
Understanding where your issue is will save you alot. I.E purchasing new coils and injectors which you already bought. You can keep tracing the wires until you reach the open circuit causing the fuss.
Trace the voltage to the DME and also check the signal going to the coil. There is a big chance your DME got short circuited and fried partially. That is just an assumption. Also check Fuse 14 and 15