Hello, im coming now with news.
After downloading and installing rheingold Ista D (220GB) & and ENET cable, i read all my faults, 66, and check one for one for big problems.
For the engine faults, 3 worried me, alternator, start engine, and valvetronic error one side.
I clean all the engine, because when the car stay upside down, the oil fill up the inteake beacuse the air filters and the air duct position.
After that, i proceed to remove the BST cable (Batery Safty Terminal), it pop up when the roll up happened.
U just need to cut the downside of the plastic, and put a piece of metal inside the another again. And its working. Dont need to delete any error with the computer. Its solves Start engine and alternator at same time.
Then i found my valvetronic conector rip off, but imposible to reconect till i take out the engine.
So i proceed to start the engine:
The white smoke was because of the oil in the turbo that i couldnt clean.
After the start i turn it off to open the garage doors for the smoke.
When i was going to start it again, i saw the oil hose for the intercooler dumping oil...
I read that oil intercooler open at 90 degrees, but not!
After 2 hours of cleaning oil... no more work for today.
Im going to asembly the intercooler, change the oil of ther car. And start it again.
Hope to come with news soon!
Bye!