i completed the install.
i took the extra wires from the MirrorTap and spliced it into the wires that go into the mirror (and Max 360).
i soldered in the 12v to 5v USB converter (has built in protection) and added some heat shrink. i covered the converter because it was a raw circuit, but i didn't shrink the heat shrink to maximize heat dissipation.
i used a short right-angle micro usb cable for the Waylens.
and it all fits into the housing easily.
the power is switched, so the radar detector turns on/off with the ignition. the camera does the same and is set to auto record.
i'll report back if i encounter any long term issues.
|