08-02-2022, 01:41 AM | #1 |
Captain
243
Rep 881
Posts |
Socal (long beach area) MAP sensor change...
Can someone recommend a shop/person? Currently running 3.5 MAP sensors on my intake manifolds. I need to go back to 2.5 bar sensors for smog(I'm back on stock tune and its throwing a CEL).
My goto shop EAS (Anaheim) is a bit high, but they're pulling the quote base off of shop manuel, since they work on a lot of BMW models. I've read that others have done in 1-2 hrs....just trying to find a good source. Dont have the time to tackle this myself. Thanks. ap
__________________
2014 "AW/SO"me M5
Mission Performance/3.5 Bar RK Autowerks/ CSF ICs SSP Spec-R KW V3/ Corsa Axle back |
08-02-2022, 01:53 AM | #2 | |
Second Lieutenant
86
Rep 242
Posts |
Quote:
Last edited by M6Roar; 08-02-2022 at 02:01 AM.. |
|
Appreciate
0
|
08-02-2022, 12:29 PM | #3 |
Captain
243
Rep 881
Posts |
So this would get rid of my CEL on stock tune with the 3.5 bar MAP?
__________________
2014 "AW/SO"me M5
Mission Performance/3.5 Bar RK Autowerks/ CSF ICs SSP Spec-R KW V3/ Corsa Axle back |
Appreciate
0
|
08-02-2022, 02:49 PM | #4 |
Second Lieutenant
86
Rep 242
Posts |
It will readjust your stock map to run 3.5 so I would say 100% if your CEL was caused by it, also you can switch off any code you get. You can check with BM3 too
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|