03-08-2019, 09:06 AM | #1 |
BIMMERPOST Sponsor
1919
Rep 3,162
Posts |
EDC Code out M5 F10 Issue
Hello,
I installed KW suspension and I want to code out EDC. I've done following: removed S223, then VO CODE: ICM,DSC,HU_NBT,KOMBI. Then I read faults with ISTA+ and I saw there are a lot of fault codes in almost every ECU - every code was about "...EDC transmitter is missing/message missing" Anyone has idea how to successfully code out EDC from M5 F10? Maybe I have to code every single ECU with removed 223 from FA? Thanks for help |
03-13-2019, 10:11 PM | #2 |
Lieutenant
431
Rep 496
Posts |
I hope to install KW V3 and do this also within a week or so.
Using TokenMaster's NCD tool to see what NCD's must be coded to ADD the EDC feature, I get only 3 modules: ICMQL, HU_NBT, and KOMBI L6 BO. The tool doesn't seem to be able to tell you what coding is necessary to remove a feature but this pretty much should say what parameters must be changed. Try VO coding the ICMQL and see if that takes care of the problem. |
Appreciate
0
|
03-15-2019, 03:56 PM | #3 |
Lieutenant
431
Rep 496
Posts |
Sorry I thought icm and icmql were different ecus
You might have to vo code all if you don't know which others need to code. This post suggests that esys will skip ecus that don't have any changes. https://f30.bimmerpost.com/forums/sh....php?t=1463221 |
Appreciate
0
|
03-18-2019, 09:48 PM | #4 |
Lieutenant
431
Rep 496
Posts |
Posts for F80 cars suggest that you must unplug the VDC (EDC) module. I believe it is located behind the front seat right-side kick panel.
|
Appreciate
0
|
03-18-2019, 11:25 PM | #5 |
Private First Class
39
Rep 134
Posts |
Have you tried plugging out the vdc module as suggested above?
__________________
Instagram: @tafikhulafaa & @88tuning.id
|
Appreciate
0
|
05-03-2019, 03:16 PM | #8 |
Lieutenant
431
Rep 496
Posts |
Most threads about doing this on the F10 M5 end this way, with no confirmation of a coding solution.
I had my KW V3s installed last week at Edge Motorworks in Mountain View. They installed the resistors from the KW EDC delete kit. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|