01-17-2022, 01:11 PM | #4 |
Cole
324
Rep 498
Posts |
|
Appreciate
0
|
01-17-2022, 06:57 PM | #5 |
Private First Class
75
Rep 122
Posts |
It looks easy enough as long as the bolts are reachable!
Thanks for the responses. I'm waiting for the weather to warm up any way. Snow and freezing temps are not the best conditions to work under in the garage! |
Appreciate
0
|
01-18-2022, 01:29 PM | #6 | |
Cole
324
Rep 498
Posts |
Quote:
-Remove engine cover -disconnect battery Bank1 1. Remove coolant reservoir screw and pull aside 2. Pop DME off, no need to unplug anything 3. Remove both bolts behind DME bracket and pull aside 4. Remove two bolt holding PCV on 5. Unclup PCV from intake 6. Re assemble in reverse order Bank2 Everything except skip step 1 above. Last edited by AnotherM; 01-19-2022 at 05:56 AM.. |
|
Appreciate
1
TinCanSailor735.00 |
01-18-2022, 09:34 PM | #7 |
Private First Class
75
Rep 122
Posts |
Thanks a lot. I ordered new ones for both banks from FCP Euro. Lifetime replacement warranty to the original purchaser. Can't beat only paying for them once!
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|