03-17-2022, 08:04 PM | #1 |
Enlisted Member
30
Rep 41
Posts |
Upper Control Arm Difference
Are the upper control arms between the competition and the non comp cars the same? I see that there are 2 different types. 31-12-7-849-503 for the -20mm camber and 31-12-2-284-980 for standard camber. I know CarBahn and Dinan also make upper control arms.
Sounds like the -20mm arms are a factory upgrade but I want to make sure they didn't come stock with the competition package. |
03-20-2022, 07:36 PM | #2 |
Lieutenant
317
Rep 564
Posts |
Non-CP and CP use the same UCAs. As far as anyone can tell, the Dinan/Carbahn arms are just rebadged versions of those other arms you found. I believe there's also a +20 version and the original intent of either is to get a damaged car back within front camber specs.
Btw, I believe it's 20 minutes of camber, or .33 degrees. |
Appreciate
1
G.Ride Garage30.00 |
03-23-2022, 05:03 PM | #3 |
First Lieutenant
398
Rep 336
Posts |
BMW had 3 different arms for camber correction.
They have aftermarket camber bushings. I think kmac makes one.
__________________
---------------------------
-=SpeedProtocol=- 2014 M5 Sakhir Orange- BPM Stage 1 - Soul Performance Exhaust - PG Intakes - CarboTech 1521 Pads - Turner Monoballs 2021 M5 Motegi Red- GTHaus SGT Full Catback |
Appreciate
1
G.Ride Garage30.00 |
Post Reply |
Bookmarks |
|
|