04-14-2019, 10:22 PM | #199 |
Brigadier General
5718
Rep 4,209
Posts
Drives: '13 F10 M5 | '15 F15 X5
Join Date: Jul 2015
Location: Seattle, WA
|
Installed my front plate finally. Got it just perfect so the front sensors don't trip out
|
Appreciate
0
|
04-15-2019, 10:41 PM | #200 |
Brigadier General
5718
Rep 4,209
Posts
Drives: '13 F10 M5 | '15 F15 X5
Join Date: Jul 2015
Location: Seattle, WA
|
Did an oil change today (59k miles). Was pretty easy. Went with liquid moly 5W-40 as recommended by the tuner
The only annoying thing was that after I put the oil back, I couldn't measure the oil until the car was warmed up. Probably will measure out 8.5 quarts ahead of time Pics: |
Appreciate
0
|
04-18-2019, 06:39 PM | #202 |
Brigadier General
5718
Rep 4,209
Posts
Drives: '13 F10 M5 | '15 F15 X5
Join Date: Jul 2015
Location: Seattle, WA
|
Little brother got a new camera so he wanted to take the car out to take some photos. Here is some iPhone photos while I wait to get the edited ones
|
Appreciate
1
carlitosgomesm5225.50 |
04-18-2019, 10:51 PM | #203 |
Brigadier General
5718
Rep 4,209
Posts
Drives: '13 F10 M5 | '15 F15 X5
Join Date: Jul 2015
Location: Seattle, WA
|
teaser
|
Appreciate
0
|
04-20-2019, 11:10 PM | #204 |
New Member
4
Rep 18
Posts |
Tell me a little bit of why you went with Griot's over Chemical Guys. I know the BMW dealership by me has all Griot products on display.
|
Appreciate
0
|
04-22-2019, 07:59 AM | #205 | |
Brigadier General
5718
Rep 4,209
Posts
Drives: '13 F10 M5 | '15 F15 X5
Join Date: Jul 2015
Location: Seattle, WA
|
Quote:
Easter bunny dropped off something yesterday |
|
Appreciate
0
|
04-23-2019, 01:26 AM | #206 |
Lieutenant
383
Rep 533
Posts |
Carbon fiber egg carrier?
__________________
1972 Bavaria> 1973 3.0Si> 2013 328i> 2009 E92 M3> 2013 F10 M5: Singapore Gray over Sakhir Orange, Executive, Driving Assistance, B&O
|
Appreciate
0
|
04-23-2019, 01:14 PM | #208 | |
Brigadier General
5718
Rep 4,209
Posts
Drives: '13 F10 M5 | '15 F15 X5
Join Date: Jul 2015
Location: Seattle, WA
|
Quote:
|
|
Appreciate
0
|
04-23-2019, 10:33 PM | #209 |
Brigadier General
5718
Rep 4,209
Posts
Drives: '13 F10 M5 | '15 F15 X5
Join Date: Jul 2015
Location: Seattle, WA
|
Couple of more photos from the other day
|
Appreciate
2
carlitosgomesm5225.50 vanilla.j_12.00 |
04-24-2019, 11:00 AM | #210 |
Brigadier General
5718
Rep 4,209
Posts
Drives: '13 F10 M5 | '15 F15 X5
Join Date: Jul 2015
Location: Seattle, WA
|
Car at dealer getting a new windshield. Got a little courtesy vehicle for the day.
|
Appreciate
0
|
04-24-2019, 11:02 AM | #211 |
Brigadier General
5718
Rep 4,209
Posts
Drives: '13 F10 M5 | '15 F15 X5
Join Date: Jul 2015
Location: Seattle, WA
|
Car at dealer getting a new windshield. Got a little courtesy vehicle for the day.
|
Appreciate
0
|
04-25-2019, 11:35 PM | #212 |
Brigadier General
5718
Rep 4,209
Posts
Drives: '13 F10 M5 | '15 F15 X5
Join Date: Jul 2015
Location: Seattle, WA
|
Installed my front lip today from RW carbon. The install was pretty easy expect I had to drill holes into the lip for the stock four screws. Used double sided tape as well for some extra insurance. I'll take some proper photos tomorrow
Last edited by Ickdeep; 04-26-2019 at 09:17 AM.. |
Appreciate
0
|
04-26-2019, 04:51 PM | #213 |
Brigadier General
5718
Rep 4,209
Posts
Drives: '13 F10 M5 | '15 F15 X5
Join Date: Jul 2015
Location: Seattle, WA
|
Some proper photos after a car wash
|
Appreciate
0
|
04-27-2019, 08:46 PM | #214 |
Brigadier General
5718
Rep 4,209
Posts
Drives: '13 F10 M5 | '15 F15 X5
Join Date: Jul 2015
Location: Seattle, WA
|
New rollers on the way (with the new front lip)
|
Appreciate
0
|
04-28-2019, 05:36 PM | #215 |
Brigadier General
5718
Rep 4,209
Posts
Drives: '13 F10 M5 | '15 F15 X5
Join Date: Jul 2015
Location: Seattle, WA
|
Cars and coffee this morning
|
Appreciate
0
|
04-30-2019, 10:55 AM | #216 |
Brigadier General
5718
Rep 4,209
Posts
Drives: '13 F10 M5 | '15 F15 X5
Join Date: Jul 2015
Location: Seattle, WA
|
Got bored last night before bed and installed my IND Polar Blue Start/Stop Button . Install was pretty easy. Used a trim tool to remove the piece holding the button. Then disconnect the wires and unscrew 3 screws to remove the button assembly. Then pop off the cover and the button. Snap on the new one and reinstall the dash piece
|
Appreciate
1
schrickm575.50 |
05-02-2019, 09:42 AM | #218 |
Brigadier General
5718
Rep 4,209
Posts
Drives: '13 F10 M5 | '15 F15 X5
Join Date: Jul 2015
Location: Seattle, WA
|
Thinking about spacers. Thinking 12mm in the front with 10mm in the rear. Thoughts?
|
Appreciate
2
MMMMM5USA1.50 carlitosgomesm5225.50 |
05-02-2019, 10:45 AM | #219 |
Second Lieutenant
226
Rep 201
Posts |
I had 12mm front and 10mm rear. Then i went 305s so i had to change my rears to 5mm. Still have my 10mm for you to buy ;-)
Last edited by carlitosgomesm5; 05-02-2019 at 12:03 PM.. |
Appreciate
0
|
05-02-2019, 11:04 AM | #220 |
Brigadier General
5718
Rep 4,209
Posts
Drives: '13 F10 M5 | '15 F15 X5
Join Date: Jul 2015
Location: Seattle, WA
|
Sounds good; just trying to get a finalization for the size. How does your front look with 10mm? Do you have any photos of it? From what I can see and tell, the front seems to have more a gap that then rear.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|