10-09-2016, 01:17 PM | #45 |
Lieutenant
200
Rep 466
Posts |
I would honestly look at the installation of the clutch itself. I would take the time and send the clutch to me to help you. Installation is very important with this clutch. You keep getting errors because something is incorrect. The clutch should adapt the first time every time.
No exceptions.... SSP |
Appreciate
0
|
10-10-2016, 07:28 PM | #47 |
Lieutenant
179
Rep 594
Posts |
I will post picture soon
Thanks kris for your help and your support i know i sent you more than 20 email 😂 Cause this is first time for upgrade dct in egypt Thanks bro |
Appreciate
0
|
10-11-2016, 11:12 AM | #51 |
Lieutenant
179
Rep 594
Posts |
|
Appreciate
0
|
10-11-2016, 11:38 AM | #52 |
Perennial PFC
348
Rep 1,277
Posts |
Those little things you never think to check can drive you crazy! The clips are identical except for the thickness? What is the difference in thickness, in mm or inches, whichever you use? The retaining slot was wide enough on both clutches to accept either C clip? If so, that's not a friendly design!
|
Appreciate
0
|
10-11-2016, 03:27 PM | #53 | |
Lieutenant
179
Rep 594
Posts |
Quote:
1.6 mm 2.6 mm Big thickness for clutch 1 And 1.6 for basker cover I reinstall dct 4 times to check somthing missing with 2 c clips in my hane 😀 |
|
Appreciate
0
|
10-13-2016, 09:45 PM | #54 | |
Lieutenant
200
Rep 466
Posts |
Quote:
The 2.6mm is for the clutch cover. Your car will not drive properly if you put the thick snap ring on the clutch basket. The adaptation will no perform correctly because it lessens the clutch travel by 1mm. Last edited by SSPKris; 10-21-2016 at 11:23 PM.. |
|
Appreciate
0
|
10-15-2016, 02:51 AM | #55 |
Lieutenant
179
Rep 594
Posts |
Can you send me photo for 2 c clips , clutch cover , clutch basket please !
|
Appreciate
0
|
10-15-2016, 02:26 PM | #56 | |
Lieutenant
179
Rep 594
Posts |
Quote:
Why incorect ! Big for basket clutch Small for basket cover |
|
Appreciate
0
|
10-17-2016, 02:49 PM | #58 | |
Lieutenant
179
Rep 594
Posts |
Quote:
1.6 out 2.6 in and i saw many picture on google search same i said if you want to put 1.6 mm out ( main cover basket ) why you didnt say that before ? |
|
Appreciate
0
|
10-17-2016, 07:18 PM | #59 |
Lieutenant
200
Rep 466
Posts |
I have told you this in 4 different emails, and once in this thread.
|
Appreciate
0
|
10-18-2016, 04:18 PM | #61 |
Lieutenant
179
Rep 594
Posts |
[QUOTE=SSPKris;20720572]I have told you this in 4 different emails, and once in this thread.[/QUOT
Can you see any dct before install clutches You can found thin on cover basket And thick for big clutches |
Appreciate
0
|
10-21-2016, 08:25 AM | #63 |
Lieutenant
179
Rep 594
Posts |
kris please check c clips photo
it should 2.6 mm on big clutch and 1.6 mm for cover basket and i open 2 dct trans same i sent picture to you before ? why you said not correct ? and if that , then you must wright in your instruction setup for clutches i feel there is something wrong and why ? i saw both of ssp clutches and stock one same height so why i need to change position for clutches ? Last edited by wheelpro; 10-21-2016 at 11:36 AM.. |
Appreciate
0
|
10-21-2016, 11:00 PM | #64 |
Lieutenant
200
Rep 466
Posts |
Wheelpro,
I am really not sure how to kindly explain this to you again. We have exchanged roughly 50 emails on this topic. I told you that the picture you are referencing is WRONG 4 TIMES NOW. Use the pictures as reference that I have shared with you, again. I am not sure how else to explain this to you. If you don't want to listen to me on how this clutch goes together, then why keep asking????? SSP Last edited by SSPKris; 10-21-2016 at 11:13 PM.. |
Appreciate
0
|
10-22-2016, 04:57 AM | #66 |
Lieutenant
179
Rep 594
Posts |
Quote:
And i asking cause i wish to say ok keep you trans , It will be 5 time to install I think i will capture photo selfe with internal componant 😂 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|