|
Post Reply |
|
Thread Tools | Search this Thread |
06-05-2017, 12:22 PM | #1 |
Captain
563
Rep 681
Posts |
F Series S63tu M5/M6 PURE Stage 2 Turbo Upgrade - Results Thread!
Hey guys, Here is some dyno results and 1/4 mile numbers for F1X/F0X/F85 S63tu Pure Stage 2 with different mods and fuel set up, -1st F10 S63tu M5 build by Autocouture Mods: -PureTurbos stage 2 -Ssp Spec R clutch w/Baskets -Dme tuning BEF -Jb4 -FBO -Meth kit -Race gas Dyno results: 821whp / 831wtq -2nd F85 S63tu X5M Mods: -PureTurbos stage 2 -DME BEF -FBO -Race fuel -AMC ZF build trans -DSS axels Dyno results: 713whp / 689wtq -3rd F12 S63tu M6 Mods: -PureTurbos stage 2 -Ssp Spec R clutch w/Baskets -DME tuning BEF -Jb4 -FBO -Meth kit -E30 fuel (gas pump and e85 mix) Dyno results: 772whp / 816wtq -4th F10 S63tu M5 6Speed Mods: -PureTurbos stage 2 -DME tuning BEF -Jb4 -FBO -Meth kit -E30 fuel (gas pump and e85 mix) -Nos -6Speed Dyno results: 900whp / 982wtq -5th F10 S63tu M5 Mods: -PureTurbos stage 2 -DME tuning BEF -Jb4 -FBO -Meth kit -E20 fuel (gas pump and e85 mix) -DSS Axles Dyno results: 747whp / 824wtq on (Mustang Dyno) -6th F13 S63tu M6 Mods: -PureTurbos stage 2 -DME tuning BEF -Jb4 -FBO -Meth kit -Race fuel -Ssp Spec R clutches Dyno results: 771whp / 761wtq -7th F10 S63tu M5 Mods: -PureTurbos stage 2 -DME tuning -FBO -Meth kit -Race fuel -Ssp Spec R clutches Dyno results: 809whp / 794wtq -8th F10 S63tu M5 Mods: -PureTurbos stage 2 (only on 27 psi) -DME BEF -FBO -Meth kit -Race fuel -Ssp Spec R clutches -DSS axels Dyno results: 761whp / 751wtq -9th F85 S63tu X5M Mods: -PureTurbos stage 2 -DME BEF -FBO -Meth kit -Race fuel -AMC ZF build trans -DSS axels Dyno results: 747whp / 773wtq -10th F10 S63tu M5 Mods: -PureTurbos stage 2 -Ssp Spec R clutch w/Baskets -Bpmsport BEF -Jb4 -FBO -Meth kit -MS109 Dyno results: 860whp / 876wtq Mods: -PureTurbos stage 1 -Ssp Spec R clutch w/Baskets -Bpmsport BEF -Jb4 -FBO -Meth kit -MS109 F85 S63tu X5M Mods: -PureTurbo Stage 2 -DME Backend Flash -Race Fuel -FBO -Jb4 -AMC ZF build trans -DSS Axels 1/4 mile results: 10.9 @ 127 MPH Last edited by Pure Turbos; 07-06-2017 at 12:40 PM.. |
06-05-2017, 05:15 PM | #3 |
F10 1/4 WR: 9.9s / 142.5mph 1/2 WR: 175.5mph
1087
Rep 1,968
Posts |
The 9.99 was with only Stage 1... never made it to the 1/4 with Stage 2.
|
Appreciate
1
Pure Turbos563.00 |
06-05-2017, 05:19 PM | #4 |
Major General
2873
Rep 7,885
Posts |
Excellent post and great for documentation purposes.
Two questions for Pure Turbo. 1. When are the Stage 3 Turbos going to be ready? 2. Any of the above cars listed above have a fully built engine (i.e. forged rods, forged pistons, cylinder heads, etc..)? I think that Ram's F10 has the only verified trap speed to support dyno numbers or I am wrong? I doubt the numbers from #4. I'd like to see some trap speed numbers on that car if any exist, and even with NOS, there's no way that stock internals can handle that. Even Ruben with his BPC built motor don't have 900whp and have achieved 169mph 1/2 mile trap speed I believe.
__________________
|
Appreciate
0
|
06-05-2017, 06:00 PM | #5 | |
F10 1/4 WR: 9.9s / 142.5mph 1/2 WR: 175.5mph
1087
Rep 1,968
Posts |
Quote:
I know Mo from DMETuning hit 140mph in the 1/4. My best was 142.5 and 1/2 mile of 175.3. A full-weight M5 in the low 800whp range will be 138-140 in the 1/4 and 168-170 in the 1/2. All of the above were stock motors... |
|
Appreciate
0
|
06-06-2017, 04:20 AM | #9 |
3387
Rep 7,541
Posts |
I think Ram's car (#10) was running 27 or 28PSI if I recall correctly.
__________________
-----| Like us on Facebook | Instagram || Tuning Information | Remote Coding |----- ----Visit us at www.BPMSport.com - Emotion. Driven. | Toll Free: (888) 557-5133---- |
Appreciate
0
|
06-06-2017, 08:20 AM | #10 |
F10 1/4 WR: 9.9s / 142.5mph 1/2 WR: 175.5mph
1087
Rep 1,968
Posts |
|
Appreciate
0
|
06-06-2017, 08:26 AM | #11 |
Lieutenant Colonel
289
Rep 1,575
Posts |
Cool to see so many upgraded cars with impressive dyno numbers but would also like to see corresponding ETs and Traps.
The nos car is interesting, does manny want more top end power? Are the upgraded turbos running out of breath? Can't wait to see rams built monster |
Appreciate
0
|
06-06-2017, 12:53 PM | #12 |
Major General
2873
Rep 7,885
Posts |
The rods can be bent with less torque than that. Depends on how hard you run the engine and how long you run it hard like that and whether or not the engine is getting enough cool down time. But yeah, if as Ram alluded to, none of the cars in this post have built internals, then I suspect, if run too hard, they will all fail, if they haven't already. There's too many weak points with the stock internals, rods, piston heads, compression ratio, etc...
__________________
|
Appreciate
0
|
06-06-2017, 12:56 PM | #13 | |
Major General
2873
Rep 7,885
Posts |
Quote:
__________________
|
|
Appreciate
0
|
06-06-2017, 08:23 PM | #16 |
Banned
3322
Rep 8,083
Posts |
|
Appreciate
0
|
06-07-2017, 12:21 AM | #17 | |
Colonel
1316
Rep 2,349
Posts |
Quote:
Basically the mod list would be flash or jb4 and pure stage 2, that's it. |
|
Appreciate
0
|
06-07-2017, 03:10 AM | #18 |
Captain
320
Rep 843
Posts |
|
Appreciate
0
|
06-07-2017, 03:19 AM | #19 | |
Private First Class
35
Rep 142
Posts |
Quote:
Think we'll see more built engine in the coming 12 months |
|
Appreciate
0
|
06-09-2017, 04:05 PM | #20 |
Captain
563
Rep 681
Posts |
We are going to keep adding more new builds and results F85 S63tu X5M Mods: -PureTurbo Stage 2 -DME Backend Flash -Race Fuel -FBO -Jb4 -AMC ZF build trans -DSS Axels 1/4 mile results: 10.9 @ 127 MPH |
Appreciate
0
|
06-09-2017, 09:21 PM | #22 |
F10 1/4 WR: 9.9s / 142.5mph 1/2 WR: 175.5mph
1087
Rep 1,968
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|