Installed DTM Headlights on my 2013 M5 - Need to code this out

[SapphireM5]

Any help with install you can share I would greatly appreciate. I want these so bad, worried about the coding etc, how did you make out with that? Thanks Bud!

[epiphanyray]

Originally Posted by SapphireM5

Any help with install you can share I would greatly appreciate. I want these so bad, worried about the coding etc, how did you make out with that? Thanks Bud!

Originally Posted by naiza3k

Did you get yours through Umnitza?

Originally Posted by SapphireM5

Any help with install you can share I would greatly appreciate. I want these so bad, worried about the coding etc, how did you make out with that? Thanks Bud!

I believe there is a video on youtube on how to get these on. Essentially you have to remove front bumper, and remove headlights. Open them up and pull out the "board". Its the electronic computer board. Then insert into umnitza lights and plug them in. Harness is plug and play.

Connect both lights and then turn on car. Test them out. Then you need to code a couple things out. (Cornering faults and something else like active headlights)

Pretty much it.

[Almaretto]

Originally Posted by epiphanyray

Hi guys.

I need to code these two lines.

LWR_AHL_TYP = ohne (removes adaptive feature)
FLC_AKTIV - to nicht aktiv (fixes cornering fault)

I have DCAN Cable, and NCS Expert (used it on my e60). Have never touched my f10 m5 with any software. Is it true I can use NCS Expert to do this? How do I know if the version OF NCS expert will work.

BMW Chassis Codes

Complete Software & Interface Overview

For your F010, you will need the following:

• ENET (OBDII to RJ45)
• E-sys
• E-sys Launcher
• Psdzdata

If you still need software or assistance, let me know.

[epiphanyray]

Originally Posted by Almaretto

BMW Chassis Codes

Complete Software & Interface Overview

For your F010, you will need the following:

• ENET (OBDII to RJ45)
• E-sys
• E-sys Launcher
• Psdzdata

If you still need software or assistance, let me know.

Thanks! But I already got everything coded out.

[Almaretto]

Originally Posted by epiphanyray

Thanks! But I already got everything coded out.

[Johnnym123]

Hey i Need Jep please
I install my halogen version lights into led headlights but I need coding it with esys

Can someone help me which coding information I need ?
They flicker on both sites if I’m start the engine

Thanks

[epiphanyray]

Originally Posted by Johnnym123

Hey i Need Jep please
I install my halogen version lights into led headlights but I need coding it with esys

Can someone help me which coding information I need ?
They flicker on both sites if I'm start the engine

Thanks

Contact adrian at s f bmw coding Maybe he can help

[Johnnym123]

Ok thanks

[Almaretto]

Originally Posted by Johnnym123

Hey i Need Jep please
I install my halogen version lights into led headlights but I need coding it with esys

Can someone help me which coding information I need ?
They flicker on both sites if I’m start the engine

Thanks

I am curious. Why did you switch to halogen lights?

Which bulbs did you switch? There is separate coding for each component. Most change in the opposite direction, but you will need to modify so correct voltage is supplied.

[kuleshov77]

Have you had success fixing the cornering issue?

[naiza3k]

I will be tackling this and install the Headlights this weekend.
Will be coding out the codes as well.

Question: I have my car flash tuned with OFT. Will the coding be erased everytime I flash the car?

Originally Posted by Almaretto

BMW Chassis Codes

Complete Software & Interface Overview

For your F010, you will need the following:

• ENET (OBDII to RJ45)
• E-sys
• E-sys Launcher
• Psdzdata

If you still need software or assistance, let me know.

[naiza3k]

Originally Posted by epiphanyray

Contact adrian at s f bmw coding Maybe he can help

Did you code yourself yourself of you had Adrian do it?