Exhaust Tips...which ones?

[umz]

Originally Posted by Dtex535

Thank you. Doesn’t anyone know where I can find a set of slant tips. I’ve been looking everywhere. I don’t want them to stick to far out of the bumper.

Maybe drop Kemir a question to see if they have any?

[Bullish657]

Originally Posted by Simple5

Take 2!!!

I finally got the correct inlets! These look absolutely incredible. Did the test fit and a lot of room to move them around the way you want. I'm going to move them about an inch back from the stock positions to make the //M logos more prevalent.

Going to install this weekend when I get my diffuser on and tie open the exhaust flappers.

These look the best imo

[M5Rick]

Originally Posted by Bugs_Funny

I like mine. Anyone behind you is like WTF? As distinctive as possible. Never seen another set on the road. Match beautiful with the gold CCB calipers. Excellent gold accents without being a moron. Not recommended if you didn’t get the CCB brakes IMO. Full Eisenmann exhaust BTW. Tips have to be purchased totally separately since they are real gold plated.

I have the silver Eisenmann set of 4 carbon fiber tips that came with the exhaust in case someone is looking for some. Used about 4 hours total then swapped out with these

Wowie makes me want to paint the inside of my Akropovic type slants in that colour.

[Noggie]

I finally got around to install my tips yesterday, Similar to simple5 tips on the previous page.
I did get the 150mm ones rather than the 120mm ones.

Well, due to the varying circumference of the competition pack exhaust, they poke out a lot more than what I expected, due to being clamped on the thickest part of the pipe, it is not able to clamp on the thinner part.

If anyone concider buying these, go with the 120mm version.

I'll figure out someway to wrap something heat resistent to build ut the pipe diameter so that I can push them further in and clamp them on.

[Sweattdogg]

Originally Posted by Noggie

I finally got around to install my tips yesterday, Similar to simple5 tips on the previous page.
I did get the 150mm ones rather than the 120mm ones.

Well, due to the varying circumference of the competition pack exhaust, they poke out a lot more than what I expected, due to being clamped on the thickest part of the pipe, it is not able to clamp on the thinner part.

If anyone concider buying these, go with the 120mm version.

I'll figure out someway to wrap something heat resistent to build ut the pipe diameter so that I can push them further in and clamp them on.

I think they still look pretty good to me.

[Noggie]

Originally Posted by Sweattdogg

I think they still look pretty good to me.

Not bad, but 1/2" further in would have looked better

[Bullish657]

I got them too - best tips for sure

[Noggie]

Originally Posted by Bullish657

I got them too - best tips for sure

And that's where I would like mine to sit

[Simple5]

Originally Posted by Bullish657

I got them too - best tips for sure

That looks great bro!

[13M5F10]

5" Tips look amazing on the rear. Really fills in the gap.

[rockyfeller]

5"? Wow. Didn't think those would fit. Sure they aren't 4"?

[Dwaynos]

Originally Posted by rockyfeller

5"? Wow. Didn't think those would fit. Sure they aren't 4"?

They certainly look like 4"

[BoogeyMan'sBMW]

Originally Posted by core22

I was looking for those as well and ended up with matte black instead. These are the BMS billet tips...

Originally Posted by Bullish657

I got them too - best tips for sure

Originally Posted by 13M5F10

5" Tips look amazing on the rear. Really fills in the gap.

Where did you guys purchase your tips?

[13M5F10]

Originally Posted by rockyfeller

5"? Wow. Didn't think those would fit. Sure they aren't 4"?

They are 5" tips. I remember thinking they'd be too big too but they look amazing. I had turner 4" tips before.

[13M5F10]

Originally Posted by BoogeyMan'sBMW

Where did you guys purchase your tips?

MSR Performance

[olis1]

I've got a set from Alibaba arriving Monday. Glossy carbon with matte stainless steel, very excited to get them installed on my AW Comp M5.

You can also order Matte Carbon or Polished Stainless. Total was about $260 shipped for all 4. I'll post pictures next week.

[olis1]

Ok, the tips came early so I took before and after pictures. Definitely satisfied with the quality and now the M5 exhaust actually matches the performance of this car. The exhaust tips always bugged me but I just wasn't willing to put a new exhaust system on. Before, after and comparison pictures below:

[Petepacman]

Originally Posted by SapphireM5

Yeah calling them today, wanted an all black tips though.

Did you ever replace your RPI exhaust tips? Mine are welded on so I’m not sure if replacing them is an option

[M5Dan]

Originally Posted by olis1

I've got a set from Alibaba arriving Monday. Glossy carbon with matte stainless steel, very excited to get them installed on my AW Comp M5.

You can also order Matte Carbon or Polished Stainless. Total was about $260 shipped for all 4. I'll post pictures next week.

Do you have a link to the exact ones you bought ?