M5POST
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read

Go Back   M5POST - BMW M5 Forum > M5 Classifieds > Sponsors Classifieds

Post Reply
 
Thread Tools Search this Thread
      09-23-2019, 02:14 PM   #1
AutoTalent
Major General
AutoTalent's Avatar
1659
Rep
8,633
Posts

Drives: M4 GTS
Join Date: Jul 2007
Location: Los Angeles

iTrader: (9)

AutoTalent | Dinan tuner+suspension+air intake+exhaust For Bmw F10 M5 2012-2016



Dinantronics Performance Tuner

To order Stage 1 please visit our website by clicking HERE

To order Stage 1 CP please visit our website by clicking HERE

To order Stage 2 please visit our website by clicking HERE

To order Stage 2 CP please visit our website by clicking HERE

DINANTRONICS™ Performance Tuner is a highly engineered and sophisticated piece of computer hardware and software that enhances engine performance, without ineffectively or invalidate your new car warranty coverage and without affecting long term reliability or the functionality of on-board diagnostic systems. In addition, It is also the only tuning device emissions legal in all 50 states. The objective of developing this piece of technology was to provide the ability to control every signal entering and exiting the BMW factory Engine Control Unit. These items are unique to Dinan and together they embody the apex of performance engineering in a powerful, reliable, and warrantied package.







-------------------------------------------------------------------

Dinan Carbon Fiber Cold Air Intake

To order please visit our website by clicking HERE

The F10 M5 Dinan high flow carbon fiber cold air intake has a sleek and functional appearance that personify high performance. The F10 M5 cold air intake allows cool outside air to be pushed into the engine via a pair of supplemental carbon fiber intake ducts located at the front of the engine bay. The stock air inlets are left intact and fully functional to provide a new total of four air intakes into the engine for maximum airflow. Improved induction airflow offered by Dinan cold air intake systems increase engine performance, even more so if used in combination with other performance enhancing Dinan products. The M5 cold air intake system was carefully designed within tight packaging constraints and in consideration of ideal aerodynamic diffusing angles to optimize the efficiency and performance of this induction system. Each duct leads combustion air through a custom designed intake assembly that has a larger than stock metered air flow housing, as well as a Dinan conical air filter with a 77% larger capacity.

Features

Maximum peak power of 693 HP and 651 lb-ft of Torque utilizing Dinan Stage 2 components (DINANTRONICS Performance Tuner, intake and exhaust). A difference of 13 HP and 7 lb-ft of torque from Dinan Stage 1 (D-TRONICS Performance Tuner Only).
Dinan proprietary Injection molded Dinan MAF housings are larger than stock
Stock air filters are replaced with 77% larger Dinan conical air filters.
Entire Dinan Intake system is sealed like a factory replacement to ensure only cold outside air and not hot air from the engine compartment is being utilized.
Stock System Stays Completely Functional
Carbon fiber air box lids and intake ducts
Raised Dinan logos are laminated into the carbon fiber intake
Rubber hoses, mounting brackets, & hardware included.







-------------------------------------------------------------------

Dinan Free Flow Exhaust

To order black tips please visit our website by clicking HERE

To order polished tips please visit our website by clicking HERE

Every Dinan product comes with our industry exclusive factory matching new car bumper to bumper warranty and is designed and tested in Morgan Hill, California and can be purchased and installed at any Dinan Approved BMW dealership nationwide.

Benefits of the Free Flow Exhaust

+ Improve performance by 8 horsepower
+ Throaty, deeper sound
+ 100% 304 Stainless Steel Construction
+ Helmholtz chamber to remove drone
+ Incorporated Butterfly Valve technology
+ Simple installation using high quality BMW clamps and hangers
+ Quad 3.5" laser engraved exhaust polished tips with Dinan logo
+ "Straight through" canister design









-------------------------------------------------------------------

Dinan Lightweight Tubular Adjustable Anti-roll Bar Set

To order black tips please visit our website by clicking HERE

Dinan tuned anti-roll bar is built and tuned specifically for each BMW chassis. Lowering the amount of body roll keeps your BMW more level than stock to improve mechanical grip, while still allowing just enough body roll. This gives the driver a much more planted and confident feeling in every corner. This Lightweight Tubular Adjustable Front Anti-Roll Bar may be added to the Stage 1 Suspension System for those who wish to build their high performance suspension in phases.

Features

Less Body Roll
More Mechanical Grip
More Stable At Limit
Large 28mm size (stock bar is 24.5mm)
2 hole bar with 3 possible positions on bar & adjustable length end links
Lightweight – 44% lighter than a solid anti-roll bar of comparable stiffness
Large 22mm size (stock bar is 21.5mm)
3 hole bar with 3 possible positions on bar
Lightweight – 29% lighter than a solid anti-roll bar of comparable stiffness





-------------------------------------------------------------

Dinan Control Arm

To order please visit our website by clicking HERE

Negative Camber Control Arms provide a reduction of understeer and more immediate turn-in from the M5 by inducing more negative camber on the front wheels. The additional negative camber improves the grip of the front tires in the turns thus reducing the vehicle's tendency to "plow" or "push" the front end for those who drive a bit more aggressively. This increase in negative camber is accomplished in two ways. The shorter front upper control arm increases camber gain, which is the amount of negative camber that is created by the geometry of the suspension as the car rolls to one side. In addition the static negative camber or the amount you will see on your alignment read out is also increased. The combination of static and dynamic camber gain adds an increase in front grip when the tire is loaded.

Features

+ Replaces front upper control arms with ones that increase negative camber by -0.3°
+ Improves grip of front tires
+ Evens out tire wear during aggressive cornering



-------------------------------------------------------------

Dinan High Performance Adjustable Coil-over Suspension System

To order please visit our website by clicking HERE

Dinans design keeps the factory Electronic Damper Control shocks in place and implements threaded collars to allow the user to change the ride height. The end result is a sleek lowered stance that provides improved handling to go along with its stunning visual appearance. The springs combined with progressive bump stops and other components increase travel that allows the car to be lowered up to a 1.25”. Suspension packers are included to fine tune handling and comfort by changing the clearance of the progressive bump-stops, something no respectable racecar is without. Components are machined from 6061-T6 aluminum and black anodized for appearance and corrosion protection.

Features

+ Threaded collars allow easy and precise front & rear vehicle height adjustments.
+ Up to 1 1/4” of lowering is possible depending on tire clearance although ¾” drop is
recommended to maintain ride quality.
+ Spring rates are 15% stiffer for both front and rear.
+ Substantial reduction in body roll.
+ Included suspension packers allow adjustment of bump-stop clearance to fine-tune
handling and comfort.
+ Dinan-spec progressive bump stops improve ride quality at lowered ride heights.
+ Components are machined from 6061-T6 aluminum and black anodized for a sporty
appearance as well as corrosion protection.
+ Compatible with BMW EDC shocks






How to Place Your Order:

Phone Domestic: (855) 973-2757 X 104

Phone International: (310) 231-7800 X 104

E-mail:
online@autotalent.com

Website:
www.AutoTalent.com



Payment:



Installations:

Feel free to visit us at our facility in Los Angeles, CA.
We install everything we sell.

19143 S. Hamilton Ave
Gardena, CA 90248




Shipping:

All orders are shipped via FedEx, UPS, USPS and Pilot.

International, Hawaii and Alaska customers: Please contact us for the best quote possible.

Hours of Operation:

Monday through Friday: 10AM-7PM Pacific Time

Saturday: By appointment only

Last edited by AutoTalent; 09-27-2019 at 12:07 PM..
Appreciate 0
      10-15-2019, 05:28 PM   #2
AutoTalent
Major General
AutoTalent's Avatar
1659
Rep
8,633
Posts

Drives: M4 GTS
Join Date: Jul 2007
Location: Los Angeles

iTrader: (9)

Bump!
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:45 AM.




m5post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST